Order Products : sales@su-jiao.com
Braskem PE HE 150
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MGqtEl_Braskem-PE-HE-150.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Description: HE150 resin is a High Density Polyethylene, copolymer of butene-1, produced by Spherilene process. It has been specially designed for monofilament extrusion process and provides a good balance of processability, spinnability, knotting strength as well as a very low gels amount. It can also be blended with LLDPE to improve blown film stiffness. It contains processing aid and antioxidant additives. Application: Raschel; shading and protecting nets; ropes. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.948 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 62 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | 28.0 | MPa | |
| Break, Compression Molded | 40.0 | MPa | |
| Flexural Modulus - 1% Secant (Compression Molded) | 1280 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Compression Molded) | 76.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 128 | °C | ASTM D1525 1 |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ranger PBT PBT-201-G0 | Beijing Ranger Chemical Co., Ltd. | PBT | Ranger PBT |
| Grilamid® 2D 20 nat | EMS-GRIVORY | Nylon 612 | Grilamid® |
| OmniLon™ PA6/6 IM4 | OMNI Plastics, LLC | Nylon 66 | OmniLon™ |
| Panlite® ML-3500ZEH | TEIJIN LIMITED | PC | Panlite® |
| Romiloy® 4010/02 UV GF8 | ROMIRA GmbH | ABS+Nylon | Romiloy® |
