Order Products : sales@su-jiao.com
SureSpec LLC4-200
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Genesis Polymers |
| Trademark: | SureSpec |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MGESPO_SureSpec-LLC4-200.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LLC4-200 is a Butene-ethylene copolymer certified prime resin designed for INJECTION MOLDING applications that require a good balance of good mechanical properties and low warpage and low temperature resistance. LLC4-200 features easy processability over a wide range of molding conditions, good flexibility, and high surface appearance of molded articles. LLC4-200 is ideal for when excellent toughness, high impact strength and high gloss are required. Recommended processing temperature is 180 to 220°C., with mold at 20 to 40°C. LLC4-200 complies with FDA regulation 21CFR 177.1520 (c) 3.1 (a) and most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, F50) | 19.0 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 12.4 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 500 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3 | 448 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength | 71.5 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -90.0 | °C | ASTM D746 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 to 220 | °C | |
| Mold Temperature | 20.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SILVER® PA523M | Guangdong Silver Age Sci & Tech. Co., Ltd | Nylon 6 | SILVER® |
| Xuchuan XCW-50MH | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| Nylene® 733 | Custom Resins Group | Nylon 6 | Nylene® |
| DINALON® B1S25 B30 | Grupo Repol | Nylon 6 | DINALON® |
| ESTOPLAST ZK 6002NN05 | Ester Industries Ltd. | PC | ESTOPLAST ZK |
