Order Products : sales@su-jiao.com
Vyncolit® X6051
| Category: | Phenolic , Phenolic |
| Manufacturer: | Vyncolit N.V. |
| Trademark: | Vyncolit® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MFeihC_Vyncolit-X6051.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Vyncolit X6051 is a phenolic molding compound with excellent mechanical properties and a good flexibility. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.38 | g/cm³ | ISO 1183 |
| Molding Shrinkage - Flow | 0.40 - 0.55 | % | ISO 294-4 |
| Water Absorption (23°C, 24 hr) | 0.15 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 6000 | MPa | ISO 527-2 |
| Tensile Stress (Break, Injection Molded) | 50.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, Injection Molded) | 0.55 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 5500 | MPa | ISO 178 |
| Flexural Stress (Injection Molded) | 130 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (Injection Molded) | 4.0 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength | 11 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 1.8 MPa, not annealed | 180 | °C | ISO 75-2/A |
| 8.0 MPa, not annealed | 150 | °C | ISO 75-2/C |
| Linear thermal expansion coefficient | ASTM E831 | ||
| Flow | 3.5E-5 | cm/cm/°C | ASTM E831 |
| Lateral | 5.5E-5 | cm/cm/°C | ASTM E831 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.60 mm | HB | UL 94 | |
| 4.00 mm | V-1 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 60.0 | °C | |
| Middle Temperature | 73.9 | °C | |
| Nozzle Temperature | 87.8 | °C | |
| Processing (Melt) Temp | 98.9 - 116 | °C | |
| Mold Temperature | 166 - 188 | °C | |
| Injection Pressure | 100 - 248 | MPa | |
| Holding Pressure | 30.0 - 89.6 | MPa | |
| Back Pressure | 4.83 - 15.2 | MPa |
| Injection instructions |
|---|
| Plastication: 50rpmInjection Time: 2 to 8 secHold Time: 1 to 5 sec/mmCure Time, 0.125 in: 5 to 12 sec/mmAll ISO properties listed were tested in accordance with ISO 3167The value listed as Molding Shrinkage, ISO 294-4, was tested in accordance with ISO 2577.ISO Type: PF 2 C1Powder Density, ISO 60: 0.5 to 0.65 g/cm³Post Shrinkage, ISO 2577: 0.5 to 0.6%HDT A (1.80 MPa) Unannealed, ISO 75A, Injection Molding: 170 to 190°CHDT A (8.0 MPa) Unannealed, ISO 75A, Injection Molding: 140 to 160°CCLTE, Flow (TMA), ASTM E831, Injection Molding: 30 to 40 cm^-6/cm°CCLTE, Transverse (TMA), ASTM E831, Injection Molding: 50 to 60 cm^-6/cm°CFlexural Strength, ISO 178, Injection Molding: 120 to 140 MPaFlexural Modulus, ISO 178, Injection Molding: 4.5 to 6.5 GPaStrain to failure in Flexure, ISO 178, Injection Molding: 2 to 2.2%Tensile Stress at Break, ISO 527-1,-2, Injection Molding: 40 to 60 MPaTensile Modulus, ISO 527-1,-2, Injection Molding: 5 to 7 GPaTensile Strain at Break, ISO 527-1,-2, Injection Molding: 0.5 to 0.6%Charpy Notched Impact Strength, ISO 179, Injection Molding: 3 to 5 kJ/m²Charpy Unnotched Impact Strength, ISO 179, Injection Molding: 10 to 12 kJ/m²Compressive Strength, ISO 604: 180 to 210 MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shandong Aobang TPU-Capro 90-A | Shandong Aobang Chemical Technology Co.,Ltd. | TPU-Capro | Shandong Aobang TPU-Capro |
| TAFMER™ A-20090 | Mitsui Chemicals America, Inc. | PAO | TAFMER™ |
| Westlake LDPE EN1817AA | Westlake Chemical Corporation | LDPE | Westlake LDPE |
| DOW™ LLDPE 8335 | The Dow Chemical Company | LLDPE | DOW™ LLDPE |
| Polimid B 34 | Poliblend S.p.a. | Nylon 6 | Polimid B |
