Order Products : sales@su-jiao.com
OnFlex™ U 5470A-E0083
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | PolyOne Corporation |
| Trademark: | OnFlex™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ME3uVI_OnFlex-U-5470A-E0083.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| OnFlex™-U thermoplastic elastomer is a polymer based on thermoplastic polyurethane elastomer (TPE-U). OnFlex™-U 5400 series products are based on SEBS and aliphatic TPU alloys, combining the advantages of these two raw materials, such as TPE-S good processability and flexibility, excellent mechanical properties, and TPE-U wear resistance. OnFlex™-U 5400 polymer has very good scratch resistance, strong hardness, and good chemical resistance and light resistance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.08 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 70 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss | 35.0 | mm³ | DIN 53516 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Fogging (100°C) | 1.1 | mg | DIN 75201B |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Odor rating | 2.30 | VDA 270 | |
| General Material Type | Thermoplastic polyurethane elastomer alloy (TPU alloy) |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1 | ISO 37 | ||
| Lateral flow : fracture, 23°C, 2.00mm | 21.3 | MPa | ISO 37 |
| Traffic : fracture, 23°C, 2.00mm | 22.2 | MPa | ISO 37 |
| Tensile Elongation 2 | ISO 37 | ||
| Lateral flow : fracture, 23°C, 2.00mm | 480 | % | ISO 37 |
| Traffic : fracture, 23°C, 2.00mm | 490 | % | ISO 37 |
| Tear Strength 3 | ISO 34-1 | ||
| Lateral flow : 23°C, 2.00mm | 56 | kN/m | ISO 34-1 |
| Traffic : 23°C, 2.00mm | 59 | kN/m | ISO 34-1 |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| 各项属性值是采用注射模制基板测量得出。 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 | °C | |
| Drying Time | 2.0 | hr | |
| Processing (Melt) Temp | 160 - 200 | °C | |
| Mold Temperature | 30.0 - 60.0 | °C | |
| Injection Rate | Slow |
| Note Message | |
|---|---|
| 1 . | Type 2, 200mm/min |
| 2 . | Type 2, 200mm/min |
| 3 . | Method A, pants-shaped sample, 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecnoflon® FOR 537 | Solvay Specialty Polymers | Fluorelastomer | Tecnoflon® |
| CALP E4331 | Lion Idemitsu Composites Co., Ltd. | Polyolefin, Unspecified | CALP |
| Dutral® TER 6148 | Versalis S.p.A. | EPDM | Dutral® |
| Hylon® N1200STL | Ravago Manufacturing Americas, LLC | Nylon 66 | Hylon® |
| LNP™ THERMOCOMP™ RF00C compound | SABIC Innovative Plastics | Nylon 66 | LNP™ THERMOCOMP™ |
