Order Products : sales@su-jiao.com
Kepital® FL2010
| Category: | Acetal (POM) Copolymer , Acetal (POM) Copolymer |
| Manufacturer: | Korea Engineering Plastics Co., Ltd |
| Trademark: | Kepital® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MCs02i_Kepital-FL2010.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A medium-high viscosity grade for general injection molding. It was modified with 10% PTFE powder, and so suitable for parts requiring low wear and friction. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.45 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 8.0 | g/10 min | ISO 1133 |
| Molding Shrinkage - Flow (3.00 mm) | 2.0 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield, 23°C) | 55.0 | MPa | ISO 527-2 |
| Nominal Tensile Strain at Break (23°C) | 14 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 2400 | MPa | ISO 178 |
| Flexural Stress (23°C) | 80.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 3.5 | kJ/m² | ISO 179/1eA |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+16 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+14 | ohms·cm | IEC 60093 |
| Electric Strength | 16 | kV/mm | IEC 60243-1 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mediprene® 502484M | ELASTO | TPE | Mediprene® |
| RheTech Polypropylene HP501-01 | RheTech, Inc. | PP Copolymer | RheTech Polypropylene |
| TIPELIN® FS 471-02 | MOL Petrochemicals Co. Ltd. | HDPE | TIPELIN® |
| Ultraform® N 2320 C BK110 | BASF Corporation | Acetal (POM) Copolymer | Ultraform® |
| ALTECH® PA6 A 2030/320.01 GF30 UV | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
