Order Products : sales@su-jiao.com
ADVANCENE™ EE-3916-AAH
| Category: | MDPE , Medium Density Polyethylene |
| Manufacturer: | ETHYDCO |
| Trademark: | ADVANCENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MCHMP7_ADVANCENEEE3916AAH.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ADVANCENE™ EE-3916-AAH is a hexene based medium density polyethylene classified as (PE80), material with an optimum balance between flexibility and strength, produced with advanced gas phase PE process. Long-term stability is ensured by an optimized stabilization system. Characteristics: ADVANCENE™ EE-3916-AAH is recommended for pressure pipe systems in the applications field of drinking water, natural gas, pressure sewerage, relining, sea outfall and industrial, where flexibility and coil ability is of importance. It also shows excellent resistance to rapid crack propagation and slow crack growth. Thanks to the structure, which gives outstanding extruability. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.939 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/21.6 kg) | 16 | g/10 min | ASTM D1238, ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638, ISO 527-2 | ||
| Yield | 19.0 | MPa | ASTM D638, ISO 527-2 |
| Fracture | 28.0 | MPa | ASTM D638, ISO 527-2 |
| Tensile Elongation 1(Break) | > 800 | % | ASTM D638, ISO 527-2 |
| Flexural Modulus - 2% Secant 2 | 690 | MPa | ASTM D790, ISO 178 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Designation | PE-80 | ISO 12162 | |
| Minimum Required Strength | > 8.00 | MPa | ISO 9080 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 180 - 210 | °C | |
| Cylinder Zone 3 Temp. | 180 - 210 | °C | |
| Cylinder Zone 5 Temp. | 180 - 210 | °C | |
| Melt Temperature | 200 - 210 | °C | |
| Die Temperature | 200 - 210 | °C |
| Note Message | |
|---|---|
| 1 . | Method B |
| 2 . | Method B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Staramide AG5K | Eurostar Engineering Plastics | Nylon 66 | Staramide |
| TOTAL Polystyrene Impact 7240 | TOTAL Refining & Chemicals | PS (HIPS) | TOTAL Polystyrene |
| Trademark PE HDP0353 | Trademark Plastics Corporation | HDPE | Trademark PE |
| Hostacom ERC 213N C12716 | LyondellBasell Industries | PP Copolymer | Hostacom |
| Sylvin 8680-50D Clear 8359 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
