Order Products : sales@su-jiao.com

VECTOR® 4461

Category:	SBS , Styrene Butadiene Styrene Block Copolymer
Manufacturer:	Dexco Polymers LP
Trademark:	VECTOR®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	MAxPpk_VECTOR-4461.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
VECTOR 4461 Styrene-Butadiene-Styrene (SBS) Block Copolymer SBS(1) triblock copolymer. Contains <1% diblock copolymer. High styrene, high melt flow block copolymer. Supplied as a porous pellet, dusted with talc. VECTOR styrenic block copolymers find use under certain regulations as articles or as ingredients in articles intended for food contact or medical applications. Please contact your Dexco Polymers agent for a detailed letter of certification or further information. VECTOR 4461 linear, pure SBS block copolymer is produced via proprietary sequential anionic polymerization technology from Dexco Polymers LP, a Dow/ExxonMobil Venture. It is formulated with the antioxidant TNPP (tris(nonylphenyl) phosphite). It has the lowest elasticity of the SBS family of products while providing high modulus, low creep resistance, excellent cohesive strength, and good melt processability. It is particularly suited for hot melt adhesives requiring high strength and low viscosity.

Message

VECTOR 4461
Styrene-Butadiene-Styrene (SBS) Block Copolymer

SBS(1) triblock copolymer.

Contains <1% diblock copolymer.

High styrene, high melt flow block copolymer.

Supplied as a porous pellet, dusted with talc.

VECTOR styrenic block copolymers find use under certain regulations as articles or as ingredients in articles intended for food contact or medical applications. Please contact your Dexco Polymers agent for a detailed letter of certification or further information.

VECTOR 4461 linear, pure SBS block copolymer is produced via proprietary sequential anionic polymerization technology from Dexco Polymers LP, a Dow/ExxonMobil Venture. It is formulated with the antioxidant TNPP (tris(nonylphenyl) phosphite).

It has the lowest elasticity of the SBS family of products while providing high modulus, low creep resistance, excellent cohesive strength, and good melt processability. It is particularly suited for hot melt adhesives requiring high strength and low viscosity.

General Information
Additive	Antioxidant
Features	Food Contact Acceptable Good Creep Resistance Good Processability High Flow High Strength Low Viscosity Porous
Uses	Adhesives
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.958	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	2.3	g/10 min	ASTM D1238
Solution Viscosity	850	mPa·s	ASTM D2196
Ash Content	0.5	wt%	ASTM D1415
Styrene Content	43.0	wt%	Internal Method

Additional Information	Nominal Value	Unit	Test Method
Diblock Content	< 1.0	wt%	Internal Method
Volatiles	0.4	wt%	Internal Method

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 1 sec)	87		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(300% Strain, 25°C)	8.27	MPa	ASTM D412
Tensile Strength ²(Yield, 25°C)	31.0	MPa	ASTM D412
Tensile Elongation ³(Break, 25°C)	700	%	ASTM D412

Note Message
1 .	25 Wt. % in toluene
2 .	25 Wt. % in toluene
3 .	25 Wt. % in toluene

Resin Grade	Manufacturer	Category	Trademark
Sylvin 8219-60UV Black	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
SUPREME GPPS SC203L	Supreme Petrochem Ltd.	PS (GPPS)	SUPREME GPPS
Genestar™ GN2332	Kuraray Co., Ltd.	Nylon 9T	Genestar™
HiFill® PA6 GF50 L	Techmer Engineered Solutions	Nylon 6	HiFill®
LUVOCOM® 1-7139	Lehmann & Voss & Co.	Nylon 66	LUVOCOM®