| Category: | PP+EPDM , Polypropylene + EPDM Rubber |
| Manufacturer: | Polykemi AB |
| Trademark: | POLYelast |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | M6Vf4S_POLYelast-TPE-HJ-75-UV1.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
| PP/Elastomer/Mineral UV-stabilized, Low CLTE |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.980 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 12 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 55 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 18.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 100 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 1000 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (-20°C) | 8.0 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength (23°C) | No Break | ISO 179 | |
| Notched Izod Impact Strength (-30°C) | 7.0 | kJ/m² | ISO 180/4A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 1(0.45 MPa, Unannealed) | 100 | °C | ISO 75-2/B |
| Vicat Softening Temperature | 125 | °C | ISO 306/A50 |
| CLTE - Flow | 6.5E-5 | cm/cm/°C | Internal Method |
| Note Message | |
|---|---|
| 1 . | 120°C/hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ranger PBT PBT-201-G0 291 | Beijing Ranger Chemical Co., Ltd. | PBT | Ranger PBT |
| Therma-Tech™ TT9200-5001 EI White | PolyOne Corporation | PPS | Therma-Tech™ |
| Topolymer® 8201-B | Dongguan Top Polymer Enterprise | TPE | Topolymer® |
| Borealis PP RB344 | Borealis AG | PP, Unspecified | Borealis PP |
| ColorRx® TPE-T66A0RXTP | LTL Color Compounders, Inc. | TPE | ColorRx® |