Order Products : sales@su-jiao.com
POLYelast TPE ZC500 D40
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Polykemi AB |
| Trademark: | POLYelast |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | M5gc05_POLYelast-TPE-ZC500-D40.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| POLYelast TPE ZC500 D40 is a Thermoplastic Elastomer (TPE) product. It is available in Asia Pacific or Europe. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 6.5 | g/10 min | ISO 1133 |
| Molding Shrinkage | ISO 294-4 | ||
| Across Flow | 0.90 to 1.1 | % | |
| Flow | 0.90 to 1.1 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 45 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 11.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 480 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 510 | MPa | ISO 178 |
| Flexural Stress | 13.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -30°C | 36 | kJ/m² | |
| 23°C | 26 | kJ/m² |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature | -50 to 100 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Vipel® F701-BID-20 | AOC, L.L.C. | Polyester Alloy | Vipel® |
| apilon 52c® C MG 100A | API SpA | TPU-Polyether | apilon 52c® |
| Daelim Po1y® LL-04S | DAELIM INDUSTRIAL CO., LTD. | LLDPE | Daelim Po1y® |
| Grivory® GV-4 FWA nat | EMS-GRIVORY | Nylon 66+Nylon 6I/X | Grivory® |
| Koylene ADL-CP AER003N | Reliance Industries Limited | PP Copolymer | Koylene ADL-CP |
