Order Products : sales@su-jiao.com
VYLOPET® EMC605P
| Category: | PBT+PET , Polybutylene Terephthalate + PET |
| Manufacturer: | TOYOBO America, Inc. |
| Trademark: | VYLOPET® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | M5eaDN_VYLOPET-EMC605P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
VYLOPET®EMC605P is a polybutylene terephthalate PET (PBT PET) product,. It is available in North America. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.42 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.00 mm) | 1.2 1.1 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.060 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 80 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 48.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.2 | % | ASTM D638 |
| Flexural Modulus | 3500 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 80.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 40 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 185 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 80.0 | °C | ASTM D648 |
| CLTE - Flow | 7.0E-5 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+17 | ohms·cm | ASTM D257 |
| Dielectric Strength (2.00 mm) | 24 | kV/mm | ASTM D149 |
| Arc Resistance | 90.0 | sec | ASTM D495 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Additional Information |
|---|
| Ball Pressure Temperature, UL746, Method B: 205 °CComparative Tracking Index, IEC Pub1.112: Class 3 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 140 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 265 | °C | |
| Mold Temperature | 80.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mold Star® 30 | Smooth-On, Inc | Silicone | Mold Star® |
| THERMOLAST® K TC5SCE (Series: SCR) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Novamid® 2030 FC | DSM Engineering Plastics | Nylon 66/6 | Novamid® |
| LNP™ COLORCOMP™ D1000FL compound | SABIC Innovative Plastics | PC | LNP™ COLORCOMP™ |
| Eleme NGC250I | Eleme Petrochemical Company Ltd | PP Impact Copolymer | Eleme |
