Order Products : sales@su-jiao.com
ENSOFT SL-161-50A
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | ENPLAST, a Ravago Group Company |
| Trademark: | ENSOFT |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | M3HMKm_ENSOFT-SL-161-50A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ENSOFT SL-161-50A is a thermoplastic elastomer (TPE) product,. It can be processed by injection molding and is available in North America or Europe. The main characteristics are: good UV resistance. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.19 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 50 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 37 | ||
| 100% strain | 1.30 | MPa | ISO 37 |
| 300% strain | 2.60 | MPa | ISO 37 |
| Tensile Stress (Break) | 5.30 | MPa | ISO 37 |
| Tensile Elongation (Break) | 600 | % | ISO 37 |
| Compression Set | ASTM D395B | ||
| 23°C, 22 hr | 16 | % | ASTM D395B |
| 70°C, 22 hr | 43 | % | ASTM D395B |
| Additional Information |
|---|
| The value listed as Density, ISO 1183, was tested in accordance with ISO 2781.Tear Strength, ISO 34-2: 20 kN/mAbrasion Resistance, DIN 53516: 620 mm³Ozone Resistance, ISO 1431: No Crack |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 150 - 160 | °C | |
| Front Temperature | 170 - 180 | °C | |
| Nozzle Temperature | 185 - 190 | °C | |
| Processing (Melt) Temp | 190 - 200 | °C | |
| Mold Temperature | 10.0 - 50.0 | °C | |
| Screw L/D Ratio | 20.0:1.0 | ||
| Screw Compression Ratio | 2.5:1.0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecnoflon® TN | Solvay Specialty Polymers | Fluorelastomer | Tecnoflon® |
| Techsil TSP100 | Techsil Limited | Silicone | Techsil |
| Wellamid® GF30-60 42LH-NBK1 | Wellman Engineering Resins | Nylon 6 | Wellamid® |
| Eltex® K3820-20 | INEOS Olefins & Polymers Europe | HDPE | Eltex® |
| Magnobond 6004 | Magnolia Plastics, Inc. | Epoxy | Magnobond |
