Order Products : sales@su-jiao.com
HIPTEN® 22027 A6
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | HIP-PetroHemija |
| Trademark: | HIPTEN® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | M2TuVV_HIPTEN-22027-A6.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HIPTEN® 22027A6 is low density polyethylene resin developed for film extrusion. It has good processability and draw down characteristics. Film obtained from this type has good optical and mechanical properties. HIPTEN® 22027A6 contains slip and antiblock additives. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.922 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.7 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 46 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield | 9.00 | MPa | ISO 527-2 |
| Fracture | 12.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 600 | % | ISO 527-2 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 1184 | ||
| TD : Yield | 11.0 | MPa | ISO 1184 |
| MD | 20.0 | MPa | ISO 1184 |
| TD | 18.0 | MPa | ISO 1184 |
| Tensile Elongation | ISO 1184 | ||
| MD : Fracture | 450 | % | ISO 1184 |
| TD : Fracture | 600 | % | ISO 1184 |
| Dart Drop Impact 1 | 80 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 250 | g | ASTM D1922 |
| TD | 350 | g | ASTM D1922 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 96.0 | °C | ISO 306 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 160 - 180 | °C |
| Extrusion instructions |
|---|
| Blow-up ratio: 2:1 to 3:1 |
| Note Message | |
|---|---|
| 1 . | F50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shin-Etsu RTV KE-3494 | Shin-Etsu Silicones of America | Silicone Rubber, RTV-1 | Shin-Etsu RTV |
| HiFill® PA6/6 GF55 HS L | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| MAJORIS DW374 - 8229 | AD majoris | PP Copolymer | MAJORIS |
| Sylvin 6034-85 Green 3191 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Tuftec™ P5051 | AKelastomers | SEBS | Tuftec™ |
