Order Products : sales@su-jiao.com
Cosmic Epoxy EH71
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Cosmic Plastics, Inc. |
| Trademark: | Cosmic Epoxy |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | M243r9_Cosmic-Epoxy-EH71.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DESCRIPTION Cosmic EH71 is an iron filled, low dust epoxy molding compound which is supplied in a granular form. FEATURES This material flows easily under low pressure and provides good moldability. APPLICATIONS The material is good for EMI / RFI shielding, and can be either compression or transfer molded to fabricate core rods and to encapsulate surface mount and axial leaded inductors. This single molded compound eliminates the labor intensive over-under molding. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 3.24 | g/cm³ | |
| Bulk Factor | 2.5 | ||
| Spiral Flow | 30.0 - 45.0 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Shelf Life (5°C) | 17 | wk | |
| Post Cure Time (160°C) | 2.0 - 4.0 | hr |
| Additional Information |
|---|
| Inductance Ls (µH) : 0.32 - 0.45Quality Factor : 6.3 - 7.4 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 130 - 180 | °C | |
| Injection Pressure | 0.345 - 5.52 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2585 | RTP Company | PC+ABS | RTP |
| Sylvin 9221-72 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| NEXT REPROCESSED PA6 8202-300R | NEXT Specialty Resins, Inc. | Nylon 6 | NEXT REPROCESSED |
| Escorene™ Ultra MV 02514 | ExxonMobil Chemical | EVA | Escorene™ Ultra |
| KEBAFORM® C 270.0 | BARLOG plastics GmbH | Acetal (POM) Copolymer | KEBAFORM® C |
