Order Products : sales@su-jiao.com
Elastocon® 8068B
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Elastocon TPE Technologies |
| Trademark: | Elastocon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | M1BD03_Elastocon-8068B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Elastocon® 8068B is a black thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8068B is well suited for consumer goods and industrial applications requiring increased U.V. stability. Elastocon® 8068B can be overmolded to polypropylene. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.6 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 73 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 2.80 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 7.85 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 660 | % | ASTM D412 |
| Compression Set (23°C, 22 hr) | 20 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 166 - 177 | °C | |
| Front Temperature | 177 - 182 | °C | |
| Nozzle Temperature | 182 - 193 | °C | |
| Mold Temperature | 21.1 - 37.8 | °C | |
| Injection Rate | Fast | ||
| Back Pressure | 0.345 - 0.689 | MPa |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Hopper Temperature | < 79.4 | °C | |
| Cylinder Zone 1 Temp. | 191 - 232 | °C | |
| Cylinder Zone 2 Temp. | 191 - 232 | °C | |
| Cylinder Zone 3 Temp. | 191 - 232 | °C | |
| Cylinder Zone 4 Temp. | 191 - 232 | °C | |
| Cylinder Zone 5 Temp. | 191 - 232 | °C | |
| Die Temperature | 191 - 232 | °C |
| Extrusion instructions |
|---|
| Compression ratio: 2.5 to 3.0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ PP5120 A1 | PolyOne Corporation | PP Homopolymer | Maxxam™ |
| Purell GC7260 G | LyondellBasell Industries | HDPE | Purell |
| Sylvin 90680-60 BLACK | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| FRAGOM XLC/125 R | Crosspolimeri S.p.A. | Polyolefin, Unspecified | FRAGOM |
| ALTECH® SAN B 2335/720 GF30 GB5 UV | ALBIS PLASTIC GmbH | SAN | ALTECH® SAN |
