Order Products : sales@su-jiao.com

Fluon® PTFE G307

Category:	PTFE , Polytetrafluoroethylene
Manufacturer:	Asahi Glass Co., Ltd.
Trademark:	Fluon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	LzvE5B_Fluon-PTFE-G307.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Fluon®PTFE granular powders (moulding powders) are used for the production of sheets, rods, billets and other general mouldings. Filled compounds are described in other page. Applications: general moulding for G307, G340 and G350 automatic moulding for G307, G340 and G350 isostatic moulding for G307, G340 and G350 rod (›diameter 20mm) and pipe by ram extrusion for G307 Characteristics: agglomerated (free flowing) unsintered powders. the best powder flow for G307. good surface finish and high bulk density for G340 and G350 the highest bulk density for G350.

Message

Fluon®PTFE granular powders (moulding powders) are used for the production of sheets, rods, billets and other general mouldings. Filled compounds are described in other page.

Applications:

general moulding for G307, G340 and G350

automatic moulding for G307, G340 and G350

isostatic moulding for G307, G340 and G350

rod (›diameter 20mm) and pipe by ram extrusion for G307

Characteristics:

agglomerated (free flowing) unsintered powders. the best powder flow for G307.

good surface finish and high bulk density for G340 and G350 the highest bulk density for G350.

General Information
Features	Good Surface Finish
Uses	General Purpose Piping Rods
Forms	Powder
Processing Method	Isostatic Molding Ram Extrusion

Physical	Nominal Value	Unit	Test Method
Apparent Density	0.75	g/cm³	JIS K6891
Molding Shrinkage	2.8	%	ISO 294-4

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength	36.0	MPa	JIS K6891
Tensile Elongation (Break)	350	%	JIS K6891

Additional Information	Nominal Value	Unit	Test Method
Median Particle Size	650.0	µm	ASTM D1457

Injection	Nominal Value	Unit
Injection Pressure	30.0	MPa

Resin Grade	Manufacturer	Category	Trademark
SABIC® PPcompound 7707	Saudi Basic Industries Corporation (SABIC)	PP, Unspecified	SABIC® PPcompound
AKROMID® B3 GF 50 black (2939)	AKRO-PLASTIC GmbH	Nylon 6	AKROMID®
Plaskolite Acrylic PL-24	Plaskolite, Inc.	Acrylic (PMMA)	Plaskolite Acrylic
Petrothene® NA940000 (Blow Molding)	LyondellBasell Industries	LDPE	Petrothene®
Sylvin 9980-75 Black	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin