Category: | ABS , Acrylonitrile Butadiene Styrene |
Manufacturer: | Buckeye Polymers, Inc. |
Trademark: | REPLEX |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | Lzkymt_REPLEX-0805-R-BLK.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
Product Information: Our BP REPLEX 0805 R Blk offers better than average impact while providing good melt flow characteristics in an affordably priced material. The values listed below are for minimum values and Buckeye Polymers always guarantees that the material will surpass the requirements listed. Features:
|
General Information | |
---|---|
Features |
|
Appearance |
|
Forms |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Specific Gravity | > 1.12 | g/cm³ | ASTM D792 |
Melt Mass-Flow Rate (MFR) (230°C/3.8 kg) | 5.0 | g/10 min | ASTM D1238 |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Flexural Modulus (23°C) | > 2280 | MPa | ASTM D790 |
Impact | Nominal Value | Unit | Test Method |
---|---|---|---|
Notched Izod Impact (23°C) | > 430 | J/m | ASTM D256 |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
Weifang Kingdom CM35 | Weifang Kingdom Plastic Co., Ltd | CM | Weifang Kingdom |
HiFill® PA6 GF50 L | Techmer Engineered Solutions | Nylon 6 | HiFill® |
IDI SMC S52 (Glass Content 22%) | IDI Composites International | TS, Unspecified | IDI SMC |
Enable™ 20-05 Series | ExxonMobil Chemical | mPE | Enable™ |
LNP™ STAT-LOY™ K3000SZ compound | SABIC Innovative Plastics | Acetal (POM) Copolymer | LNP™ STAT-LOY™ |