Order Products : sales@su-jiao.com
Pebax® 3533 SN 01
| Category: | PEBA-Ether , Polyether Block Amide |
| Manufacturer: | Arkema |
| Trademark: | Pebax® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LzZkGI_Pebax-3533-SN-01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Pebax® 3533 SN 01 is a Polyether Block Amide (PEBA-Ether) product. It can be processed by blow molding, calendering, casting, coating, extrusion, film extrusion, injection molding, profile extrusion, resin transfer molding, sheet extrusion, or thermoforming and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Multi-Point Data |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1010 | 1010 | kg/m³ | ISO 1183 1 |
| Melt volume-flow rate (235°C/1.0 kg) | 12.0 | -- | cm³/10min | ISO 1133 2 |
| Water Absorption | ISO 62 3 | |||
| Saturation | 1.2 | -- | % | |
| Equilibrium | 0.50 | -- | % |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile modulus | 19.0 | 15.0 | MPa | ISO 527-2 4 |
| Tensile Stress (50% Strain) | 4.00 | 4.00 | MPa | ISO 527-2 5 |
| Tensile Strain (Break) | > 50 | > 50 | % | ISO 527-2 6 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy notched impact strength | ISO 179/1eA 7 | |||
| -30°C | -- | No Break | ||
| 23°C | -- | No Break | ||
| Charpy impact strength | ISO 179/1eU 8 | |||
| -30°C | -- | No Break | ||
| 23°C | -- | No Break |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa) | 46.0 | -- | °C | ISO 75-2 9 |
| Melting Temperature 10 | 144 | -- | °C | ISO 11357-3 11 |
| CLTE - Flow | 2.1E-4 | -- | cm/cm/°C | ISO 11359-2 12 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface resistivity | -- | 3.0E+12 | ohms | IEC 60093 13 |
| Volume resistivity | 3.2E+10 | -- | ohms·m | IEC 60093 14 |
| Electric strength | 34 | -- | kV/mm | IEC 60243-1 15 |
| Relative Permittivity | IEC 60250 16 | |||
| 100 Hz | 6.00 | -- | ||
| 1 MHz | 6.00 | -- | ||
| Dissipation Factor | IEC 60250 17 | |||
| 100 Hz | 0.031 | -- | ||
| 1 MHz | 0.043 | -- | ||
| Comparative tracking index | -- | 600 | IEC 60112 18 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Burning Behav. at 1.6mm nom. thickn. (1.60 mm, UL) | HB | -- | ISO 1210 19 |
| Note Message | |
|---|---|
| 1 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 2 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 3 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 4 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 5 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 6 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 7 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 8 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 9 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 10 . | 10 °C/min |
| 11 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 12 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 13 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 14 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 15 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 16 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 17 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 18 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 19 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RAMLLOY PB917G6 | Polyram Ram-On Industries | Nylon 6+PP | RAMLLOY |
| ECOMID ARX N | Nilit Plastics | Nylon 66 | ECOMID |
| Kemcor LD 5270 | Qenos Pty Ltd | LDPE | Kemcor |
| ISPLEN® PP 040 C1E | REPSOL | PP Homopolymer | ISPLEN® |
| TECHNYL® C 52G1 V30 GREY 2408CF | Solvay Engineering Plastics | Nylon 6 | TECHNYL® |
