Order Products : sales@su-jiao.com
FRAGOM PR/04 AFKK N
| Category: | TP, Unspecified , Thermoplastic |
| Manufacturer: | Crosspolimeri S.p.A. |
| Trademark: | FRAGOM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LxUxkO_FRAGOM-PR-04-AFKK-N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
FRAGOM : is our brand of thermoplastic compounds having a very low flame propagation under fire conditions. Our Fragom is PVC free and also heavy-metals free. FRAGOM PR/04 AFKK N : is designed to extrude both cable insulation and sheathing at high speed without any migration risks as it is completely free of plasticizers. Fragom PR/04 AFKKN meets the Australian Standard AS/NZ3808.2000 Insulation Type HFI-75-TP,HFI-90-TP,HFI-110-TP Sheathing Type HFS-75-TP,HFS-90-TP,HFS-110-TP Certify : CEI2011 M1,VDE0207HM4(K=0,7),BS7655 LTS 3-4 |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.40 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (160°C/21.6 kg) | 6.0 - 12 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 53 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | > 10.0 | MPa | IEC 60811 |
| Tensile Strain (Break) | > 170 | % | IEC 60811 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (110°C, 168 hr) | < 25 | % | IEC 60811 |
| Change in Tensile Strain at Break in Air (110°C, 168 hr) | < 25 | % | IEC 60811 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hot pressing test- 6 h at 90°C-Penetration | % | IEC 60811 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Halogen Content | 0 | % | IEC 60754-1 |
| Temperature Index (Combustion) 1 | > 300 | °C | NES 715 |
| Corrosive gases in flue gas- pH | > 4.50 | IEC 60754-2 |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Tear Strength | > 10.0 | BS 6469 99.1 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Head Temperature | 185 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Constant (50 Hz) | 4.10 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 30 | % | ASTM D2863 |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| FRAGOM compounds can be coloured with any PE based Masterbatch, black included.For optimal results, we recommend to dry the masterbatch too. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 - 90.0 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Cylinder Zone 1 Temp. | 130 | °C | |
| Cylinder Zone 2 Temp. | 145 | °C | |
| Cylinder Zone 3 Temp. | 160 | °C | |
| Cylinder Zone 4 Temp. | 180 | °C | |
| Die Temperature | 190 | °C |
| Note Message | |
|---|---|
| 1 . | 21% O2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VECTRA® A725 | Celanese Corporation | LCP | VECTRA® |
| APEX® RE 9022 | Teknor Apex Company | PVC, Rigid | APEX® |
| Axiall PVC 13870 | Axiall Corporation | PVC, Flexible | Axiall PVC |
| Plaslube® PA6/6 GF40 IM HS L BK | Techmer Engineered Solutions | Nylon 66 | Plaslube® |
| ULTEM™ HU1000E resin | SABIC Innovative Plastics | PEI | ULTEM™ |
