Order Products : sales@su-jiao.com
INEOS PP N12N-00
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | INEOS Olefins & Polymers USA |
| Trademark: | INEOS PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LwUAUv_INEOS-PP-N12N-00.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| N12N-00 is a medium melt flow rate, nucleated polypropylene impact copolymer designed for injection molding and compounding applications. The grade benefits from a high stiffness and high impact resistance at both room and low temperatures. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.897 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 70 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 23.4 | MPa | |
| Break | 17.7 | MPa | |
| Tensile Elongation 2 | ASTM D638 | ||
| Yield | 7.1 | % | |
| Break | 320 | % | |
| Flexural Modulus - 1% Secant | 1050 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (-20°C) | 80 | J/m | ASTM D256 |
| Notched Izod Impact (Area) | ASTM D256 | ||
| -20°C | 8.10 | kJ/m² | |
| 23°C | No Break | ||
| Instrumented Impact, Ductility | ASTM D3763 | ||
| -20°C | Ductile | ||
| 23°C | Ductile |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 93.3 | °C | |
| 1.8 MPa, Unannealed | 52.8 | °C | |
| Vicat Softening Temperature | 143 | °C | ASTM D1525 |
| Optical | Nominal Value | Test Method | |
|---|---|---|---|
| Gloss (60°) | 64 | ASTM D2457 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SITRAMAC 8E-UV / C09606 | SITRAPLAS GmbH | Acrylic (PMMA) | SITRAMAC |
| Braskem PP HP 502N | Braskem | PP Homopolymer | Braskem PP |
| Desmopan® DP 9365D | Covestro - PUR | TPU-Polyether | Desmopan® |
| KRATON® D1116 E | Kraton Polymers LLC | SBS | KRATON® |
| SIBUR Synthetic Rubber IR SKI-3 Group I | SIBUR | IR | SIBUR Synthetic Rubber |
