Order Products : sales@su-jiao.com
Braskem PE HC 7260 LS-L
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LwGU8D_Braskem-PE-HC-7260-LS-L.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HC7260LS-L is a high-density polyethylene, developed for the injection molding which presents high hardness and stiffness, besides low tendency to warpage. This resin has additives against the ultraviolet radiation action. Application: Industrial containers, Safety Helmets, Toilet seats, Housewares, Toys, Lids, Pallets, Boxes for beverages bottles, caps and closures. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.959 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.2 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, 2.00 mm, 100% Igepal, Compression Molded, F50) | < 4.00 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 64 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Compression Molded) | 30.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Compression Molded) | 7.5 | % | ASTM D638 |
| Flexural Modulus - 1% Secant (Compression Molded) | 1350 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Compression Molded) | 35 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Compression Molded) | 76.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 126 | °C | ASTM D1525 1 |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mirakutoran® TPU E985 | Japan Mirakutoran Inc. | TPU Alloy | Mirakutoran® TPU |
| TECHNYL® A 246M NATURAL | Solvay Engineering Plastics | Nylon 66 | TECHNYL® A |
| Titanvene™ LL0214AA | PT. TITAN Petrokimia Nusantara | MDPE | Titanvene™ |
| NORYL GTX™ RNX130 resin | SABIC Innovative Plastics | PPE+PS+Nylon | NORYL GTX™ |
| LNP™ THERMOCOMP™ RF004XXH compound | SABIC Innovative Plastics | Nylon 66 | LNP™ THERMOCOMP™ |
