Order Products : sales@su-jiao.com
CYREX® Protect
| Category: | PC+Acrylic , Polycarbonate + Acrylic (PMMA) |
| Manufacturer: | Evonik Cyro LLC |
| Trademark: | CYREX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LvyBYi_CYREX-Protect.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
CYREX® Protect is an opaque acrylic-polycarbonate alloy providing antimicrobial capabilities* against a variety of microorganisms commonly found in healthcare facilities. It is the latest addition to the family of Evonik Cyro's advanced polymers for antimicrobial medical device applications. Offering outstanding impact strength and toughness, CYREX® alloys empower designers to create better-than-ever medical devices. Typical Medical Applications
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.16 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/3.8 kg) | 3.0 | g/10 min | ASTM D1238 |
| Water Absorption (Equilibrium) | < 0.26 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 45 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2140 | MPa | ASTM D638 |
| Tensile Strength | 54.5 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield | 4.0 | % | |
| Break | 25 | % | |
| Flexural Modulus | 2070 | MPa | ASTM D790 |
| Flexural Strength | 92.4 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 640 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Annealed, 6.35 mm) | 96.1 | °C | ASTM D648 |
| Vicat Softening Temperature | 130 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.0 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Processing (Melt) Temp | 238 to 260 | °C | |
| Mold Temperature | 65.0 to 99.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Medalist® MD-560W BT | Teknor Apex Company | TPE | Medalist® |
| Sinvicomp SFE6500 | Teknor Apex Asia Pacific PTE. LTD. | PVC, Flexible | Sinvicomp |
| ULTEM™ 2312EPR resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| HIFOR® LT74113 | Westlake Chemical Corporation | LLDPE | HIFOR® |
| Huafon JF-P-550S / JF-I-650 | Huafon Group Co., Ltd. | PUR-Ether | Huafon |
