Order Products : sales@su-jiao.com

Ebalta GM 959 / Comp. A+B

Category:	PUR, Unspecified , Polyurethane
Manufacturer:	Ebalta Kunststoff GmbH
Trademark:	Ebalta
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Lvi3oh_Ebalta-GM-959-Comp-A-B.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
This product is a polyurethane system. By mixing of hardeners shore hardness between A 40 and A 80 can be reached (see mixing table). The product can be subject to colour variations due to raw materials, but these colour variations have no influence on the quality and the properties of the product. Applications Casting moulds for concrete Casting mould for cement Casting mould for ceramic materials Casting mould for wax Casting mould for gypsum Casting mould for plastic Prototypes with rubber-like properties Properties shore A hardness 45 shore hardness (flexibility) variable excellent flow properties good degasing easily dyeable good tear propagation resistance

Message

This product is a polyurethane system.
By mixing of hardeners shore hardness between A 40 and A 80 can be reached (see mixing table).

The product can be subject to colour variations due to raw materials, but these colour variations have no influence on the quality and the properties of the product.

Applications

Casting moulds for concrete

Casting mould for cement

Casting mould for ceramic materials

Casting mould for wax

Casting mould for gypsum

Casting mould for plastic

Prototypes with rubber-like properties

Properties

shore A hardness 45

shore hardness (flexibility) variable

excellent flow properties

good degasing

easily dyeable

good tear propagation resistance

General Information
Features	Good Colorability Good Flexibility High Flow
Uses	Molds/Dies/Tools Prototyping
Appearance	Amber
Processing Method	Casting

Hardness	Nominal Value		Test Method
Shore Hardness (Shore A)	43 to 47		ISO 7619

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(Yield)	3.50 to 4.10	MPa	ISO 37
Tensile Elongation ²(Break)	2300 to 2700	%	ISO 37
Tear Strength ³(1.00 mm)	8.9 to 9.5	kN/m	ISO 34-1

Thermoset	Nominal Value	Unit
Thermoset Components
Hardener	Mix Ratio by Weight: 140
Resin	Mix Ratio by Weight: 100

Uncured Properties	Nominal Value	Unit
Density (20°C)	1.01 to 1.05	g/cm³
Viscosity (25°C)	0.95 to 1.4	Pa·s
Curing Time (20°C)	20 to 24	hr
Pot Life ⁴(20°C)	22 to 28	min

Note Message
1 .	Type 2
2 .	Type 2
3 .	Arch shaped test piece with incision
4 .	200 g

Resin Grade	Manufacturer	Category	Trademark
MARPOL® COPP 50.1.8	Marco Polo International, Inc.	PP Copolymer	MARPOL® COPP
SLOVALEN® PH 59 GB 20	Plastcom	PP, Unspecified	SLOVALEN®
Starex WR-9370	SAMSUNG SDI CO., LTD.	ASA	Starex
Hanwha Total PP FB72M	HANWHA TOTAL PETROCHEMICALS Co., Ltd.	PP, Unspecified	Hanwha Total PP
Ultramid® Structure B3WG12 LFX BK23215	BASF Corporation	Nylon 6	Ultramid®