Order Products : sales@su-jiao.com

TOTAL Polystyrene Crystal rePS-5

Category:	PS (GPPS) , General Purpose Polystyrene
Manufacturer:	TOTAL Refining & Chemicals
Trademark:	TOTAL Polystyrene
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	LuFP9H_TOTAL-Polystyrene-Crystal-rePS-5.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
TOTAL Petrochemicals rePS-5 is a high heat crystal polystyrene that contains a minimum of 25% recycled polystyrene. The polymer was developed to have properties similar to TOTAL Petrochemicals 585 for use in tandem extrusion foam and injection molded applications. Applications Foam Foodservice Packaging Cutlery, Housewares, Office Supplies General Information This polystyrene material complies with FDA food contact regulations as set forth in 21 CFR §177.1640. Material Safety Data Sheets are available to help customers satisfy their safety needs.

Message

TOTAL Petrochemicals rePS-5 is a high heat crystal polystyrene that contains a minimum of 25% recycled polystyrene. The polymer was developed to have properties similar to TOTAL Petrochemicals 585 for use in tandem extrusion foam and injection molded applications.

Applications

Foam Foodservice Packaging

Cutlery, Housewares, Office Supplies

General Information

This polystyrene material complies with FDA food contact regulations as set forth in 21 CFR §177.1640.

Material Safety Data Sheets are available to help customers satisfy their safety needs.

General Information
Recycled Content	Yes, 25%
Features	Food Contact Acceptable
Uses	Foam Food Packaging Household Goods
Agency Ratings	FDA 21 CFR 177.1640
Forms	Pellets
Processing Method	Coextrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.04	g/cm³
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	3.0	g/10 min	ASTM D1238
Molding Shrinkage - Flow	0.40 to 0.70	%	ASTM D955
Moisture	< 0.10	%

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	2900	MPa	ASTM D638
Tensile Strength	52.4	MPa	ASTM D638
Flexural Modulus	3380	MPa	ASTM D790
Flexural Strength	105	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Annealed)	99.4	°C	ASTM D648
Vicat Softening Temperature	107	°C	ASTM D1525

Resin Grade	Manufacturer	Category	Trademark
TRIMMA® SD6350H	Samyang Corporation	Acrylic (PMMA)	TRIMMA®
DOW™ LLDPE 1613.11	The Dow Chemical Company	LLDPE	DOW™ LLDPE
Altuglas® SG7	Altuglas International of Arkema Inc.	Acrylic (PMMA)	Altuglas®
APEX® 84455	Teknor Apex Company	PVC, Flexible	APEX®
Ateva® 1941	Celanese EVA Performance Polymers	EVA	Ateva®