Order Products : sales@su-jiao.com
Precision Polymer V75T
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | Precision Polymer Engineering Ltd. |
| Trademark: | Precision Polymer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LrTTdc_Precision-Polymer-V75T.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Peroxide cured, Fluoroelastomer Rubber, 70-80 IRHD. Tetrapolymer of vinylidene fluoride, perfluoromethyl vinyl ether, tetrafluoroethylene plus cure site monomer (CSM). Formulated using Viton? GLT. Viton? is a registered trademark of Dupont®. ASTM designation = FKM. ISO designation = FPM. Recommended for use in static or dynamic applications where low temperature performance is required. Chemical resistance is similar to that of standard fluoroelastomer. Low temperature performance superior to other grades of fluoroelastomer. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| IRHD Hardness | 75 | ASTM D1415, ISO 48 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 17.9 | MPa | ASTM D412, ISO 37 |
| Tensile Elongation (Break) | 150 | % | ASTM D412, ISO 37 |
| Compression Set (200°C, 24 hr) | 20 | % | ASTM D395B, ISO 815 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (250°C, 72 hr) | -20 | % | ASTM D412, ISO 37 |
| Change in Ultimate Elongation in Air (250°C, 72 hr) | 15 | % | ASTM D412, ISO 37 |
| Change in IRHD Hardness in Air (250°C, 72 hr) | -4.0 | ASTM D573, ISO 188 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Maximum Operating Temperature | 200 | °C |
| Additional Information |
|---|
| Minimum Operating Temperature: -40°C (-40°F) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Menzolit® BMC 0300 | Menzolit Ltd (UK) | Polyester, TS | Menzolit® |
| ULTEM™ CRS5201 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| ACCUTECH™ HP0336T40002L | ACLO Compounders Inc. | PP Homopolymer | ACCUTECH™ |
| Cheng Yu T882GV1 | Cheng Yu Plastic Company Limited | PBT | Cheng Yu |
| Elastron® G G400.A30.T | Elastron USA, Inc. | SEBS | Elastron® G |
