Order Products : sales@su-jiao.com
DynaMix™ 2018-MGA
| Category: | Nylon, Unspecified , Polyamide |
| Manufacturer: | Polymer Dynamix |
| Trademark: | DynaMix™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LrRd7f_DynaMix-2018-MGA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Lubricated Dimensionally Stable Nylon Features:
Applications:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.23 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.50 to 0.80 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.50 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 89.6 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.0 to 5.0 | % | ASTM D638 |
| Flexural Modulus | 4480 | MPa | ASTM D790 |
| Flexural Strength | 145 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 53 | J/m | ASTM D256 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 93.3 to 104 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Rear Temperature | 260 to 288 | °C | |
| Middle Temperature | 266 to 293 | °C | |
| Front Temperature | 274 to 302 | °C | |
| Nozzle Temperature | 277 to 302 | °C | |
| Processing (Melt) Temp | 277 to 302 | °C | |
| Mold Temperature | 65.6 to 82.2 | °C | |
| Injection Pressure | 68.9 to 138 | MPa | |
| Injection Rate | Fast | ||
| Back Pressure | 0.345 to 6.89 | MPa | |
| Screw Speed | 40 to 70 | rpm | |
| Clamp Tonnage | 5.5 to 8.3 | kN/cm² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SEQUEL® E3000 | LyondellBasell Industries | TPO (POE) | SEQUEL® |
| YUNCON® N90-01 | YunNan YunTianHua Co., Ltd. | Acetal (POM) Copolymer | YUNCON® |
| NuSil MED10-6640 | NuSil Technology | Silicone | NuSil |
| 3M™ Dyneon™ PTFE TF 2035Z | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ PTFE |
| Iupilon® MB2212R | Mitsubishi Engineering-Plastics Corp | PC+ABS | Iupilon® |
