Order Products : sales@su-jiao.com
Nypol® PA A3 T40 HS NTLA013 NR327
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Petropol Industry and Trade of Polymers LTDA |
| Trademark: | Nypol® PA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LqKb68_Nypol-PA-A3-T40-HS-NTLA013-NR327.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polyamide 6.6 natural with 40% of mineral reinforced. Ideal for injection molding, good set of thermal properties, electrical and mechanical. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Processing Method |
|
| Resin ID (ISO 1043) |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.49 | -- | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.90 to 1.0 | -- | % | ASTM D955 |
| Water Absorption (Equilibrium) | 1.6 | -- | % | ASTM D570 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Strength | 90.0 | 63.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 10 | 38 | % | ASTM D638 |
| Flexural Modulus | 2400 | 2000 | MPa | ASTM D790 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Notched Izod Impact | 7.0 | 12 | J/m | ASTM D256 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | |||
| 0.45 MPa, Unannealed | 215 | -- | °C | |
| 1.8 MPa, Unannealed | 100 | -- | °C | |
| Melting Temperature | 250 to 265 | -- | °C | ASTM D2117 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity | 1.0E+13 | -- | ohms·cm | ASTM D257 |
| Dielectric Strength (2.00 mm) | 24 | -- | kV/mm | ASTM D149 |
| Relative Permittivity (100 Hz) | 4.20 | -- | IEC 60250 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating | HB | -- | UL 94 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 | °C | |
| Drying Time | 3.0 | hr | |
| Suggested Max Moisture | 0.20 | % | |
| Processing (Melt) Temp | 280 to 300 | °C | |
| Mold Temperature | 70.0 to 120 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NEXUS PP HPP50 | Nexus Resin Group, LLC. | PP Homopolymer | NEXUS PP |
| Nanjing Hongrui PBT T1304 | Nanjing Hongrui Engineering Plastics Co., Ltd. | PBT | Nanjing Hongrui PBT |
| DAI-EL™ G-7211 | DAIKIN AMERICA, INC. | Fluorelastomer | DAI-EL™ |
| EOS Alumide® | EOS GmbH | Nylon 12 | EOS |
| Deprene 251-90 | Shanghai Lin Gen Rubber Materials Co., Ltd. | PP+EPDM | Deprene |
