Order Products : sales@su-jiao.com
TOTAL Polyethylene HDPE 7194
| Category: | HDPE, MMW , High Density (MMW) Polyethylene |
| Manufacturer: | TOTAL Refining & Chemicals |
| Trademark: | TOTAL Polyethylene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LnelXZ_TOTAL-Polyethylene-HDPE-7194.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TOTAL Polyethylene 7194 is a high density (MMW) polyethylene material,. This product is available in North America and is processed by extrusion. The main characteristics of TOTAL Polyethylene 7194 are: compliance with REACH standard. Typical application areas include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.946 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.55 | g/10 min | ASTM D1238 |
| 190°C/5.0 kg | 1.9 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 2% Secant 1 | 689 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 22.1 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 500 | % | ASTM D638 |
| Flexural Modulus | 793 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peak Melting Temperature | 125 | °C | ASTM D3418 |
| Additional Information |
|---|
| Elongation at Break, ASTM D638, Type IV, 2 in/min: 500% |
| Note Message | |
|---|---|
| 1 . | Type 4, 51mm/min |
| 2 . | Type 4, 51mm/min |
| 3 . | Type 4, 51mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| AKROMID® T1 GF 50 black (3101) | AKRO-PLASTIC GmbH | PPA | AKROMID® |
| Daicel PA PA9T-GF50-01 | Daicel Polymer Ltd. | Nylon, Unspecified | Daicel PA |
| DIC.PPS FZ-2130 | DIC Corporation | PPS | DIC.PPS |
| INSULCAST® 136/INSULCURE 9 | ITW Polymers Coatings North America | Epoxy | INSULCAST® |
| SARANEX™ 750 Beige | The Dow Chemical Company | PVDC | SARANEX™ |
