Order Products : sales@su-jiao.com
Generic TPSiV
| Category: | TPSiV , Thermoplastic Silicone Vulcanizate |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Llgid7_Generic-TPSiV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic TPSiV This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 1.10 - 1.19 | g/cm³ | ISO 1183 |
| Molding Shrinkage (23°C) | 2.0 | % | ISO 294-4 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (23°C) | 62 - 83 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus (23°C) | 14.0 - 64.4 | MPa | ISO 178 |
| Flexural Stress (23°C) | 0.740 - 4.70 | MPa | ISO 178 |
| Taber Abrasion Resistance (23°C) | 61.4 - 64.0 | mg | ASTM D1044 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain, 23°C) | 1.50 - 7.80 | MPa | ISO 37 |
| Tensile Stress (Yield, 23°C) | 4.40 - 15.4 | MPa | ISO 37 |
| Tensile Elongation (Break, 23°C) | 470 - 610 | % | ISO 37 |
| Tear Strength (23°C) | 20 - 63 | kN/m | ISO 34-1 |
| Compression Set (23°C) | 9.0 - 33 | % | ISO 815 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 72.5 - 90.0 | °C | |
| Drying Time | 3.0 - 4.5 | hr | |
| Rear Temperature | 165 - 175 | °C | |
| Middle Temperature | 169 - 190 | °C | |
| Front Temperature | 174 - 189 | °C | |
| Nozzle Temperature | 190 - 205 | °C | |
| Processing (Melt) Temp | 190 - 215 | °C | |
| Mold Temperature | 25.0 - 30.0 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic TPSiVThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ FR PP CONC 36 NAT S | PolyOne Corporation | PP, Unspecified | Maxxam™ FR |
| RELENE® O19010 | Reliance Industries Limited | LLDPE | RELENE® |
| REVOLVE® M-601 | Matrix Polymers | PE, Unspecified | REVOLVE® |
| Flontech® FLON-1408-1 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Geon™ HTX Ultra LA427Plus | PolyOne Corporation | PVC Alloy | Geon™ HTX Ultra |
