Order Products : sales@su-jiao.com
ESPOLEX 487X
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | Sumitomo Chemical America, Inc. |
| Trademark: | ESPOLEX |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LgKsgb_ESPOLEX-487X.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ESPOLEX 487X is a polyolefin thermoplastic elastomer (TPO (POE)) product,. It can be processed by injection molding and is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. Typical application areas are: automotive industry. |
| General Information | |
|---|---|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.880 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 4.4 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 38 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 140 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 7.70 | MPa | ASTM D412 |
| Tensile Elongation 2(Break) | 430 | % | ASTM D412 |
| Tear Strength | 53.0 | kN/m | ASTM D624 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -45°C 3 | No Break | ASTM D256 | |
| -40°C | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -60.0 | °C | ASTM D746 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 199 - 243 | °C | |
| Mold Temperature | 21.1 - 48.9 | °C | |
| Injection Rate | Fast | ||
| Back Pressure | 0.345 - 0.689 | MPa |
| Injection instructions |
|---|
| Injection Pressure: HighPack/Hold Pressure: 40-70% of Inj PressScrew RPM: SlowPart Draft: 3-6° per sideTool Surface Finish: Light Texture |
| Note Message | |
|---|---|
| 1 . | C mold, 500 mm/min |
| 2 . | Mouth die C, 500 mm/min |
| 3 . | 95 J/m |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Axpoly® r-PP51 1071 | Axion Polymers | PP, Unspecified | Axpoly® |
| GAPEX® RPP25EA88HB-BK | Ferro Corporation | PP Homopolymer | GAPEX® |
| ESTADIENE 2525 AS | Cossa Polimeri S.r.l. | ABS | ESTADIENE |
| LNP™ THERMOTUF™ VF004S compound | SABIC Innovative Plastics | Nylon, Unspecified | LNP™ THERMOTUF™ |
| LEXAN™ 121R resin | SABIC Innovative Plastics | PC | LEXAN™ |
