For-Tec E OC8OAZ (Series: AD/PAX/MR)

Category: TPE , Thermoplastic Elastomer
Manufacturer: KRAIBURG TPE
Trademark: For-Tec
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: Lf54BC_For-Tec-E-OC8OAZ-Series-AD-PAX-MR-.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
The AD/PAX/MR Series is your material solution for two-component-seals in electronic applications and soft-touch grips and handles of machine tools. The material provides an excellent resistance to skin oils, suncream, olive oil and acetone, accompanied by outstanding adhesion properties to semi-aromatic polyamids and polyarylamids such as PA 12, PA 6 und PA 6.6. The series is available in natural and black colors.

Typical applications
  • Attenuators for electronic housings
  • Connectors
  • Handles (Powertool)
  • Seals
  • Seals for computer and laptopscreens
  • Seals for housings

Material advantages
  • Easy coloring
  • Excellent adhesion to semi-aromatic Polyamides, Polyarylamids,
  • Polyamides like PA 12, PA 6 and PA 6.61
  • Excellent mechanical properties
  • Resistance against skin oils, sunscreens, olive oil and acetone
General Information
Features
  • Good coloring
  • Good adhesion
  • Oil resistance
Uses
  • Handle
  • Electrical/Electronic Applications
  • Connector
  • Seals
  • Soft touch application
Appearance
  • Black
Processing Method
  • Injection molding
PhysicalNominal ValueUnitTest Method
Density 1.10g/cm³ISO 1183
HardnessNominal ValueUnitTest Method
Durometer Hardness (Shore A)79ISO 7619
ElastomersNominal ValueUnitTest Method
Tensile Stress 1(Yield)8.00MPaISO 37
Tensile Elongation 2(Break)850%ISO 37
Tear Strength 37kN/mISO 34-1
Compression Set ISO 815
    23°C, 72 hr 33%ISO 815
    70°C, 24 hr 55%ISO 815
    100°C, 24 hr 64%ISO 815
Additional InformationNominal ValueUnitTest Method
Adhesion to Nylon 40.0kN/mRenault D41/1916
Adhesion to Polyarylamide 20.0kN/mRenault D41/1916
InjectionNominal ValueUnit
Drying Temperature 60.0 - 80.0°C
Drying Time 2.0 - 4.0hr
Rear Temperature 180°C
Middle Temperature 210°C
Front Temperature 240°C
Mold Temperature 60.0 - 80.0°C
Injection Pressure 20.0 - 100MPa
Back Pressure 2.00 - 5.00MPa
Injection instructions
Hot Runner Temperature: 200 - 250°CThe runner should be empty after a maximum of 2 - 3 shots.
Note Message
1 .Type S2, 200 mm/min
2 .Type S2, 200 mm/min
Resin Grade Manufacturer Category Trademark
Manner Flexible PVC V930 Manner Plastics, L.P. PVC, Flexible Manner Flexible PVC
PVC Film 181 NT Teknor Apex Company PVC, Flexible PVC Film
TEREZ PA 6 7650 T TER HELL PLASTIC GMBH Nylon 6 TEREZ PA 6
ALTECH® PP-H A 2030/250 GF30 CP ALBIS PLASTIC GmbH PP Homopolymer ALTECH® PP-H
Sylvin 6236-80 Black Sylvin Technologies Incorporated PVC, Unspecified Sylvin