Order Products : sales@su-jiao.com
RABALON® PJ5300C
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Mitsubishi Chemical Performance Polymers, Inc. |
| Trademark: | RABALON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Lf3uGT_RABALON-PJ5300C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
RABALON® PJ5300C is a Thermoplastic Elastomer (TPE) material. It is available in Asia Pacific, Europe, or North America. Primary attribute of RABALON® PJ5300C: Sterilizable. Typical application of RABALON® PJ5300C: Medical/Healthcare |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.890 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 4.0 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 45 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 1.00 | MPa | ISO 37 |
| Tensile Stress (Break) | 10.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | 950 | % | ISO 37 |
| Tear Strength | 20 | kN/m | ISO 34-1 |
| Compression Set 1(70°C, 22 hr) | 40 | % | ISO 815 |
| Note Message | |
|---|---|
| 1 . | 6 sheets (each thickness = 2mm) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VITAMIDE® AS10NT6050 | Jackdaw Polymers | Nylon 66 | VITAMIDE® |
| LG PMMA IG840 | LG MMA Corp. | Acrylic (PMMA) | LG PMMA |
| Paracril® P3350CC2 | INSA | NBR | Paracril® |
| POCAN® B 1600 000000 | LANXESS GmbH | PBT | POCAN® |
| Kepamid® 1330GFH | Korea Engineering Plastics Co., Ltd | Nylon 6 | Kepamid® |
