Order Products : sales@su-jiao.com
Utomer UT590
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | Shanghai Utomer Material Science Co., Ltd. |
| Trademark: | Utomer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LeXBL8_Utomer-UT590.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Utomer Polyether type TPU which can be applied to Injection, Extrusion and Calendering. Molding cycle is short and efficient for Injection production. The stability melt is easy for Extrusion production. Hydrolysis resistance, low temperature performance with a wide processing window. Extrusion Blown, Flat Die Cast Film, Injection Tag Wheel and Cable Jacketing |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.12 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 88 to 92 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss | 40.0 | mm³ | DIN 53516 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain | 15.0 | MPa | |
| 300% Strain | 18.0 | MPa | |
| Tensile Strength | 30.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 380 | % | ASTM D412 |
| Tear Strength | 0.150 | kN/m | ASTM D624 |
| Compression Set | ASTM D395B | ||
| 23°C, 70 hr | 26 | % | |
| 70°C, 24 hr | 32 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -12.0 | °C | ASTM D3418 |
| Melting Temperature | 185 to 200 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SILPURAN® 6000/30 A/B | Wacker Chemie AG | Silicone | SILPURAN® |
| TAISOX 6810M | Formosa Plastics Corporation | LDPE | TAISOX |
| WPP PP PPH3MG3.7 | Washington Penn Plastic Co. Inc. | PP Homopolymer | WPP PP |
| Chemical Resources BPP100 | Chemical Resources, Inc. | PP Impact Copolymer | Chemical Resources |
| PENTAMID A GV30 H schwarz | PENTAC Polymer GmbH | Nylon 66 | PENTAMID A |
