Order Products : sales@su-jiao.com
EcoHumer BFX103
| Category: | PBAT , Polybutylene Adipate-Co-Terephthalate |
| Manufacturer: | WooSung Chemical Co., Ltd. |
| Trademark: | EcoHumer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LbPBqc_EcoHumerBFX103.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| BFX103 is biodegradable compound for blown film. The base material of BFX103 is PBAT(Polybutylene-adipate-co-terephthalate). The film made by BFX103 will be softer than the PLA-based film, and it will have good mechanical properties - Elongation and Tear Strength. In addtion, BFX103 can be formed into film easily and it will have good blocking property. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.24 - 1.26 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 20 - 40 | g/10 min | ASTM D1238 |
| Water content- 105°C/10min | ppm | Internal method |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Seal Strength 1(30.0 µm) | 14 | N | Internal method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear strength- 1mm notch 2(30.0 µm) | 88.2 | kN/m | Internal method |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength - MD (yield, 30 µm, blown film) | 34.6 | MPa | Internal method |
| Tensile Elongation - MD (Broken, 30 µm, blown film) | 430 | % | Internal method |
| Note Message | |
|---|---|
| 1 . | Blown Film |
| 2 . | Blown Film |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TARFLON™ SK3731 | Idemitsu Kosan Co., Ltd. | PC+AS | TARFLON™ |
| APEX® 3700-60NT1 | Teknor Apex Company | PVC, Flexible | APEX® |
| Celanex® 3209HR | Celanese Corporation | PBT | Celanex® |
| ICORENE® N2103 | ICO Polymers EMEA, A Division of A. Schulman | LDPE | ICORENE® |
| Plexiglas® DR® | Altuglas International of Arkema Inc. | Acrylic (PMMA) | Plexiglas® |
