Order Products : sales@su-jiao.com
ENFLEX VL-120-40D
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | ENPLAST, a Ravago Group Company |
| Trademark: | ENFLEX |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LaTHAP_ENFLEX-VL-120-40D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ENFLEX VL-120-40D is a thermoplastic vulcanized rubber (TPV) product,. It can be processed by extrusion or injection molding and is available in North America or Europe. The main characteristics are: good UV resistance. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.960 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 40 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 37 | ||
| 100% strain | 8.00 | MPa | ISO 37 |
| 300% strain | 9.50 | MPa | ISO 37 |
| Tensile Stress (Break) | 18.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | 650 | % | ISO 37 |
| Compression Set | ASTM D395B | ||
| 23°C, 72 hr | 46 | % | ASTM D395B |
| 70°C, 22 hr | 60 | % | ASTM D395B |
| Additional Information |
|---|
| The value listed as Density, ISO 1183, was tested in accordance with ISO 2781.Tear Strength, ISO 34-2: 82 kN/mOzone Resistance, ISO 1431: No Crack |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 | °C | |
| Drying Time | 2.0 | hr | |
| Rear Temperature | 170 - 180 | °C | |
| Front Temperature | 190 - 200 | °C | |
| Nozzle Temperature | 200 - 210 | °C | |
| Processing (Melt) Temp | 210 - 220 | °C | |
| Mold Temperature | 10.0 - 50.0 | °C | |
| Screw L/D Ratio | 20.0:1.0 | ||
| Screw Compression Ratio | 2.5:1.0 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 | °C | |
| Drying Time | 3.0 | hr | |
| Cylinder Zone 1 Temp. | 190 | °C | |
| Cylinder Zone 2 Temp. | 195 | °C | |
| Cylinder Zone 3 Temp. | 205 | °C | |
| Cylinder Zone 4 Temp. | 210 | °C | |
| Cylinder Zone 5 Temp. | 220 | °C |
| Extrusion instructions |
|---|
| Machine Capacity, 30 mm cylinder diameter: 15 to 20 kg/hrMachine Capacity, 45 mm cylinder diameter: 60 to 85 kg/hrMachine Capacity, 60 mm cylinder diameter: 100 to 150 kg/hrMachine Capacity, 90 mm cylinder diameter: 225 to 300 kg/hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Europrene® SOL R C2525 | Versalis S.p.A. | SBR, Solution | Europrene® |
| GPP™ 1001V0F | S&E Specialty Polymers, LLC | TPO (POE) | GPP™ |
| InnoPlus HD3001C | PTT Global Chemical Public Company Limited | HDPE | InnoPlus |
| MAJORIS FD905U | AD majoris | PP, Unspecified | MAJORIS |
| OP - PPS 40GF | Oxford Polymers | PPS | OP - PPS |
