Order Products : sales@su-jiao.com
SABIC® PPcompound 20MBTFU
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® PPcompound |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LaGkFU_SABIC-PPcompound-20MBTFU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SABIC® PPcompound 20MBTFU is a talc filled masterbatch for use with SABIC®PP Super high impact copolymers and as such part of the SABIC® PP CS system. This material contains UV stabilization for exterior application. SABIC® PPcompound 20MBTFU is a designated automotive grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.33 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 6.0 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, Injection Molded) | 67 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2/5/50 | ||
| Yield, 3.20 mm, Injection Molded | 27.0 | MPa | |
| Break, 3.20 mm, Injection Molded | 24.0 | MPa | |
| Tensile Strain (Break, 3.20 mm, Injection Molded) | 10 | % | ISO 527-2/5/50 |
| Flexural Modulus 1(Injection Molded) | 2700 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C, Injection Molded) | 4.0 | kJ/m² | ISO 179/1eA |
| Notched Izod Impact Strength | ISO 180/4A | ||
| 0°C, Injection Molded | 3.0 | kJ/m² | |
| 23°C, Injection Molded | 4.0 | kJ/m² |
| Note Message | |
|---|---|
| 1 . | Method I (3 point load) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Yanshan PE 6100M | SINOPEC Beijing Yanshan Petrochemical | HDPE | Yanshan PE |
| Durez® 5034 | Sumitomo Bakelite North America, Inc. | Phenolic | Durez® |
| ELASTOSIL® SOLAR 1200 | Wacker Chemie AG | Silicone | ELASTOSIL® SOLAR |
| HiFill® PA6/6 0177 | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| Monprene® CP-11180 (PRELIMINARY DATA) | Teknor Apex Company | TPE | Monprene® |
