Order Products : sales@su-jiao.com
SCANAMID 66 A12^ Q40
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Polykemi AB |
| Trademark: | SCANAMID 66 |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | La9C8c_SCANAMID-66-A12-Q40.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Mineral reinforced |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.47 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | |||
| Across Flow | 1.2 | -- | % | |
| Flow | 1.2 | -- | % |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 80 | -- | ASTM D2240 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Stress | 90.0 | 70.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 5.0 | 8.0 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 5000 | 3400 | MPa | ISO 178 |
| Flexural Stress | 135 | 95.0 | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | |||
| -20°C | 5.0 | -- | kJ/m² | |
| 23°C | 8.0 | 11 | kJ/m² |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature 1 | ||||
| 0.45 MPa, Unannealed | 250 | -- | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 215 | -- | °C | ISO 75-2/A |
| Vicat Softening Temperature | > 230 | -- | °C | ISO 306/B50 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating (1.60 mm) | HB | -- | UL 94 | |
| Glow Wire Ignition Temperature (2.00 mm) | 650 | -- | °C | IEC 60695-2-13 |
| Note Message | |
|---|---|
| 1 . | 120°C/hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mirakutoran® TPU E590 | Japan Mirakutoran Inc. | TPU Alloy | Mirakutoran® TPU |
| Sumitomo Silicone SI 9002N-1 | Sumitomo Bakelite North America, Inc. | Silicone | Sumitomo Silicone |
| Escorene™ Ultra FL 02020 | ExxonMobil Chemical | EVA | Escorene™ Ultra |
| OTECH TPO OTR3595-Molding | OTECH Corporation | TPE | OTECH TPO |
| Durethan® DP BM 65 X FM30 901510 | LANXESS GmbH | Nylon 6 | Durethan® |
