Order Products : sales@su-jiao.com
Advanced Composites ADX-5017
| Category: | TPO , Compounded Polypropylene |
| Manufacturer: | Advanced Composites, Inc. |
| Trademark: | Advanced Composites |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LWSLr1_Advanced-Composites-ADX-5017.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Advanced Composites ADX-5017 is a composite polypropylene product, which contains talc filler. It is available in North America. Typical application areas are: automotive industry. Features include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.04 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 28 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 61 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 22.0 | MPa | ISO 527-2 |
| Flexural Modulus | 2020 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ISO 180 | ||
| -40°C | 6.0 | kJ/m² | ISO 180 |
| 23°C | 30 | kJ/m² | ISO 180 |
| Instrumented Dart Impact 1(-30°C) | 37.2 | J | ASTM D3763 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 118 | °C | ISO 75-2/B |
| Additional Information |
|---|
| Instrumented Dart Impact, ASTM D3763, -30°C, 6.7 m/s, (# Ductile: 30/30): >37.2 JScratch Resistance, FLTM BN108-13: >15 N |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 204 | °C | |
| Middle Temperature | 218 | °C | |
| Front Temperature | 218 | °C | |
| Nozzle Temperature | 216 | °C | |
| Processing (Melt) Temp | 204 - 232 | °C | |
| Mold Temperature | 48.9 - 60.0 | °C | |
| Cushion | 6.35 - 12.7 | mm |
| Injection instructions |
|---|
| Injection Pressure: 10% over max fill pressureHolding Pressure: 50 to 60% of max fill pressureInjection Speed: 1 to 3 inches/secScrew RPM: 1 to 2 secs before mold open |
| Note Message | |
|---|---|
| 1 . | 6.70 m/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Epoxies, Ect. 50-1952 | Epoxies, Etc. | Silicone | Epoxies, Ect. |
| Kepamid® 2300ST | Korea Engineering Plastics Co., Ltd | Nylon 66 | Kepamid® |
| Hostaform® MT8F02 | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
| PLUSTEK PA604 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
| Mediprene® 500352M | ELASTO | SEBS | Mediprene® |
