Order Products : sales@su-jiao.com
SABIC® HDPE CC453
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | SABIC Americas, Inc. |
| Trademark: | SABIC® HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LUwMkf_SABIC-HDPE-CC453.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SABIC HDPE CC453 is high density polyethylene specially developed for the injection and compression molding of Caps & Closures for the packaging of beverages . This grade offers an ideal combination of impact strength, ESCR and meet organoleptic properties requirements. Typical Applications
Key Features
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.953 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal, Compression Molded, F50) | 7.00 | hr | ASTM D1693B |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 60 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Injection Molded | 23.0 | MPa | |
| Break, Injection Molded | 21.0 | MPa | |
| Tensile Elongation (Break, Injection Molded) | > 800 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 800 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 21.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Injection Molded) | 150 | J/m | ASTM D256 |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Sensoric - Organoleptic properties | Approved | Internal Method |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Centrex® 833A | Network Polymers, Inc. | ASA+AES | Centrex® |
| Gazprom PSM-115NB | JSC Gazprom neftekhim Salavat | PS (GPPS) | Gazprom |
| EPO-TEK® 302 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| LNP™ STAT-KON™ DX04490 compound | SABIC Innovative Plastics | PC | LNP™ STAT-KON™ |
| MAJ'ECO FN000E - 8229 | AD majoris | Biodeg Polymers | MAJ'ECO |
