Order Products : sales@su-jiao.com
DELOXEN P 3010
| Category: | PPE+PS+PP , Polyphenylene Ether + PS + PP |
| Manufacturer: | Vamp Tech |
| Trademark: | DELOXEN |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LUnqMz_DELOXEN-P-3010.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PPO / PP, 30% glass fiber reinforced, not Flame Retardant compound, good mechanical properties. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.22 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.30 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 6000 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 70.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 2.5 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | 13 | kJ/m² | ISO 180/A |
| Unnotched Izod Impact Strength | 30 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 145 | °C | ASTM D648A |
| Vicat Softening Temperature | 140 | °C | ASTM D1525 1 |
| RTI Elec | 120 | °C | UL 746 |
| RTI Imp | 120 | °C | UL 746 |
| RTI Str | 120 | °C | UL 746 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 280 | °C | |
| Mold Temperature | 80.0 | °C |
| Note Message | |
|---|---|
| 1 . | Loading 2 (50 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PP H7631 | Sincerity Australia Pty Ltd. | PP, Unspecified | Sindustris PP |
| THERMOLAST® M TM7LFT (Series: MC/LF) | KRAIBURG TPE | TPE | THERMOLAST® M |
| EQUATE PE EFDC-7050 | EQUATE Petrochemical Company KSCC | LLDPE | EQUATE PE |
| EPAMOULD 672D12 | Epaflex Polyurethanes S.R.L. | TPU-Polyester | EPAMOULD |
| ALTECH® PA6 A 3030/220 GB30 UV | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
