| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | NOVA Chemicals |
| Trademark: | SCLAIR® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LThBav_SCLAIR2610CC.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
|
SCLAIR®2610CC is a high density polyethylene material,. This product is available in North America and is processed by injection molding. SCLAIR®The main features of 2610CC are:
Typical application areas include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.946 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 18 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal, F50) | < 19.0 | hr | ASTM D1693B |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 61 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 22.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 170 | % | ASTM D638 |
| Flexural Modulus | 1160 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 120 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNYL® A 258P1 BLACK 2N | Solvay Engineering Plastics | Nylon 66 | TECHNYL® A |
| Sinvicomp SIM5000 | Teknor Apex Asia Pacific PTE. LTD. | PVC, Flexible | Sinvicomp |
| TAISOX 3224 | Formosa Plastics Corporation | LLDPE | TAISOX |
| Evoprene™ LF 6154 | AlphaGary | SBC | Evoprene™ LF |
| Pibiflex® 2560 NATURALE | SO.F.TER. SPA | TPC-ET | Pibiflex® |