Order Products : sales@su-jiao.com
Alpha PVC GW 3010 NATURAL LCF-P
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | AlphaGary |
| Trademark: | Alpha PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LQvnQU_Alpha-PVC-GW-3010-NATURAL-LCF-P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 60C OR 75C DEGREE, LEAD-FREE, HIGH QUALITY, HIGHLY FLAME RETARDED JACKETING COMPOUND. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.38 - 1.44 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw D | 62 - 68 | ASTM D2240 | |
| Shaw D, 15 seconds | 47 - 53 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D412 | ||
| 0.610 mm | 24.1 | MPa | ASTM D412 |
| 1.91 mm | 20.7 | MPa | ASTM D412 |
| Tensile Elongation | ASTM D412 | ||
| Fracture, 1.91mm | 300 | % | ASTM D412 |
| Fracture, 0.610mm | 280 | % | ASTM D412 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air 1 | UL Unspecified | ||
| 100°C, 168 hr | 0.0 | % | UL Unspecified |
| 100°C, 240 hr | -9.0 | % | UL Unspecified |
| Change in Ultimate Elongation in Air 2 | UL Unspecified | ||
| 100°C, 168 hr | -10 | % | UL Unspecified |
| 100°C, 240 hr | -16 | % | UL Unspecified |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -13.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Constant (23°C, 100 MHz) | 3.00 | ASTM D150 | |
| Dissipation Factor (23°C, 100 MHz) | 0.016 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (3.18 mm) | 34 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 160 | °C | |
| Cylinder Zone 2 Temp. | 166 | °C | |
| Cylinder Zone 3 Temp. | 171 | °C | |
| Cylinder Zone 4 Temp. | 177 | °C | |
| Cylinder Zone 5 Temp. | 182 | °C | |
| Adapter Temperature | 182 | °C | |
| Melt Temperature | 182 - 193 | °C | |
| Die Temperature | 182 | °C |
| Extrusion instructions |
|---|
| It may be necessary to adjust barrel temp to attain the desired melt temperatureScrew Design: Standard PVC metering screw with a 3:1 compression ratio. |
| Note Message | |
|---|---|
| 1 . | Thickness: 24 mil |
| 2 . | Thickness: 24 mil |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ADDINYL B2H M30 | ADDIPLAST | Nylon 6 | ADDINYL |
| HIPOLEN P® TM 2 | HIPOL A.D. | PP Homopolymer | HIPOLEN P® |
| POLYfill PP EIP5025 F VT2 | Polykemi AB | PP+EPDM | POLYfill |
| StarPrene® 6101-70 | Star Thermoplastic Alloys & Rubbers, Inc. | TPE | StarPrene® |
| LEXAN™ 101 resin | SABIC Innovative Plastics | PC | LEXAN™ |
