Altuglas® Luctor™ Medical Grade Datasheet,Acrylic (PMMA),Altuglas International of Arkema Inc.-SHANGHAI SUSHENG

Altuglas® Luctor™ Medical Grade

Wechat: WECHAT

Message
Altuglas® Luctor™ is an impact-modified acrylic resin suitable for injection molding and extrusion. It is designed to provide outstanding chemical resistance and is well suited for intravenous and other medical devices where maximum resistance to alcohol, lipid emulsions, TPN solutions or new generation oncology drugs is paramount. Some of the features and benefits of Altuglas® Luctor™ are: Chemical Resistance Outstanding resistance to lipids and drug formulations Superior resistance to isopropyl alcohol (IPA) Property retention after exposure to hospital antiseptics, acids and bases Sterilization Stable to gamma radiation, E-beam, and ETO Rapid recovery with very good color stability Retention of transparency and clarity Retention of mechanical properties Processability Excellent melt processability Reduced cycle times Suitable for thin-wall applications and complex multi-cavity molds Good bondability using solvent, ultrasonic, or radio frequency methods Biofriendly Contains more than 25% bio-renewable carbon content

Message

Altuglas® Luctor™ is an impact-modified acrylic resin suitable for injection molding and extrusion. It is designed to provide outstanding chemical resistance and is well suited for intravenous and other medical devices where maximum resistance to alcohol, lipid emulsions, TPN solutions or new generation oncology drugs is paramount.

Some of the features and benefits of Altuglas® Luctor™ are:

Chemical Resistance

Outstanding resistance to lipids and drug formulations

Superior resistance to isopropyl alcohol (IPA)

Property retention after exposure to hospital antiseptics, acids and bases

Sterilization

Stable to gamma radiation, E-beam, and ETO

Rapid recovery with very good color stability

Retention of transparency and clarity

Retention of mechanical properties

Processability

Excellent melt processability

Reduced cycle times

Suitable for thin-wall applications and complex multi-cavity molds

Good bondability using solvent, ultrasonic, or radio frequency methods

Biofriendly

Contains more than 25% bio-renewable carbon content

General Information
Additive	Impact Modifier
Features	Acid Resistant Alcohol Resistant Base Resistant Biocompatible Bondability BPA Free E-beam Sterilizable Ethylene Oxide Sterilizable Fast Molding Cycle Good Chemical Resistance Good Color Stability Good Moldability Good Processability High Clarity High ESCR (Stress Crack Resist.) Impact Modified Radiation (Gamma) Resistant Renewable Resource Content
Uses	Medical Devices Medical/Healthcare Applications
Agency Ratings	ISO 10993 Part 10 ISO 10993 Part 4 ISO 10993 Part 5 USP Class VI
RoHS Compliance	RoHS Compliant
Appearance	Clear/Transparent
Forms	Pellets
Processing Method	Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.18	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/3.8 kg)	6.5	g/10 min	ASTM D1238
Molding Shrinkage - Flow	0.20 to 0.60	%	ASTM D955
Water Absorption (24 hr)	0.40	%	ASTM D570

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (M-Scale)	21		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	2410	MPa	ASTM D638
Tensile Strength (Break)	43.4	MPa	ASTM D638
Tensile Elongation (Break)	60	%	ASTM D638
Flexural Modulus	2280	MPa	ASTM D790
Flexural Strength (Yield)	66.9	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	37	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
0.45 MPa, Annealed	67.2	°C
1.8 MPa, Annealed	62.2	°C
Vicat Softening Temperature
--	73.9	°C	ASTM D1525 ¹
--	68.3	°C	ASTM D1525 ²
Thermal Conductivity	0.23	W/m/K	ASTM C177

Flammability	Nominal Value		Test Method
Flame Rating	HB		UL 94

Optical	Nominal Value	Unit	Test Method
Refractive Index ³	1.470		ASTM D542
Transmittance (3180 µm)	87.0	%	ASTM D1003
Haze (3180 µm)	5.0	%	ASTM D1003

Additional Information	Nominal Value	Unit	Test Method
ASTM Classification	PMMA Unspecified		ASTM D788
Biobased Content - Carbon	25	%

Note Message
1 .	Rate A (50°C/h), Loading 1 (10 N)
2 .	Rate A (50°C/h), Loading 2 (50 N)
3 .	ND @ 72°F

Resin Grade	Manufacturer	Category	Trademark
NILAMID® B3 HHR GF30	Nilit Plastics	Nylon 6	NILAMID®
NORYL™ WCV065 resin	SABIC Innovative Plastics	PPE+Polyolefin	NORYL™
4LAC® 10H23100 H	4Plas	ABS	4LAC®
DynaMix™ 2044-G20D	Polymer Dynamix	Nylon 66	DynaMix™
AA-Recoplast A3H1	SmartLab Latvia SIA	PE, Unspecified	AA-Recoplast

Resin Grade

Manufacturer

Category:	Acrylic (PMMA) , Polymethyl Methacrylate Acrylic
Manufacturer:	Altuglas International of Arkema Inc.
Trademark:	Altuglas® Luctor™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	LMU2Ei_Altuglas-Luctor-Medical-Grade.pdf
PRICE:	Order Products email sales@su-jiao.com