Order Products : sales@su-jiao.com
RELENE® L60075
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | RELENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LMNQnZ_RELENE-L60075.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| L60075 is a High Density Polyethylene (HDPE) grade suitable for injection moulding applications where good mechanical properties are essential with gloss, dimensional stability, good ESCR, required for technical mouldings like moulded crates, luggage shells, helmets, defence applications, etc. UV Stabilised version, L60075 is also available with recommended service life of more than 5 years. L60075 is suitable for applicationswhere articles are exposed to sunlight e.g. soft drink crates, defence applications, helmets, paint pails, etc. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.960 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 69 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 25.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, Injection Molded) | 800 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 900 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Injection Molded) | 88 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 128 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| BESTNYL SC00VI01AWX | Triesa Plastics | Nylon 66/6 | BESTNYL |
| CERTENE™ PBM-80N | Muehlstein | PP Impact Copolymer | CERTENE™ |
| Desmovit® DP R 9929 | geba Kunststoffcompounds GmbH | TPU-Ester/Ether | Desmovit® |
| DOMAMID® 6G25 | DOMO Engineering Plastics SPA | Nylon 6 | DOMAMID® |
| POLYFLAM® RIPP 3625 CS1 | A. Schulman Europe | PP Copolymer | POLYFLAM® |
