Order Products : sales@su-jiao.com
Generic EMAA
| Category: | EMAA , Ethylene Methacrylic Acid |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LGFxbB_Generic-EMAA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic EMAA This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 0.930 - 0.960 | g/cm³ | ASTM D792 |
| 23°C | 0.928 - 0.963 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.70 - 12 | g/10 min | ASTM D1238, ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (23°C) | 40 - 68 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | |||
| Yield, 23°C | 11.3 - 15.6 | MPa | ASTM D638 |
| Fracture, 23°C | 10.3 - 29.1 | MPa | ASTM D638, ISO 527-2 |
| Tensile Elongation (Break, 23°C) | 290 - 530 | % | ASTM D638, ISO 527-2 |
| Flexural Modulus (23°C) | 29.6 - 430 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength (23°C) | 336 - 1270 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -112 - -75.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 47.0 - 90.2 | °C | ASTM D1525, ISO 306 |
| Melting Temperature | |||
| -- | 99.9 - 109 | °C | DSC |
| -- | 70.0 - 93.0 | °C | ASTM D3418 |
| -- | 70.0 - 109 | °C | ISO 3146 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze | 2.5 - 27 | % | ASTM D1003 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 235 - 236 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic EMAAThis information is provided for comparative purposes only. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 135 - 185 | °C | |
| Cylinder Zone 2 Temp. | 160 - 235 | °C | |
| Cylinder Zone 3 Temp. | 185 - 285 | °C | |
| Cylinder Zone 4 Temp. | 185 - 310 | °C | |
| Cylinder Zone 5 Temp. | 185 - 310 | °C | |
| Adapter Temperature | 185 - 310 | °C | |
| Melt Temperature | 203 - 315 | °C | |
| Die Temperature | 185 - 310 | °C |
| Extrusion instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic EMAAThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRL PPX-MF-FRG20 | Polymer Resources Ltd. | PPE+PS | PRL |
| DJSilicone NE-261 | DONGJUE SILICONE (NANJING) CO., LTD | Silicone | DJSilicone |
| Flontech® FT-COND2-2 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| OTECH PVC OW635 - Connector | OTECH Corporation | PVC, Unspecified | OTECH PVC |
| LEXAN™ SLX2432T resin | SABIC Innovative Plastics | PC | LEXAN™ |
