Order Products : sales@su-jiao.com
Kepital® TX-31
| Category: | Acetal (POM) Copolymer , Acetal (POM) Copolymer |
| Manufacturer: | Korea Engineering Plastics Co., Ltd |
| Trademark: | Kepital® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LFnSvE_Kepital-TX-31.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| An easy flowing grade for general injection molding. It is suitable for use requiring reduced noise and a good friction & wear resistance without sacrificing mechanical properties. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.39 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Mass-Flow Rate (MFR) | |||
| 190°C/2.16 kg | 27 | g/10 min | ASTM D1238 |
| -- | 30 | g/10 min | ISO 1133 |
| Molding Shrinkage | |||
| Flow : 3.00mm | 2.0 | % | ASTM D955 |
| 3.00 mm | 2.0 | % | |
| Water Absorption (Equilibrium, 23°C, 60% RH) | 0.22 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 80 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | |||
| Yield, 23°C | 55.0 | MPa | ASTM D638 |
| Yield, 23°C | 56.0 | MPa | ISO 527-2 |
| Tensile Elongation (Break, 23°C) | 55 | % | ASTM D638 |
| Nominal Tensile Strain at Break | 35 | % | ISO 527-2 |
| Flexural Modulus | |||
| 23°C | 2500 | MPa | ASTM D790 |
| 23°C | 2400 | MPa | ISO 178 |
| Flexural Strength (23°C) | 80.0 | MPa | ASTM D790, ISO 178 |
| Coefficient of Friction | ASTM D1894 | ||
| With Metal-Dynamic | 0.21 | ASTM D1894 | |
| With self-dynamics | 0.16 | ASTM D1894 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 7.0 | kJ/m² | ISO 179/1eA |
| Notched Izod Impact (3.20 mm) | 69 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, not annealed | 158 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 110 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 89.0 | °C | ISO 75-2/A |
| Peak Melting Temperature | 165 | °C | ASTM D3418 |
| CLTE - Flow (20 to 80°C) | 1.3E-4 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+16 | ohms | ASTM D257, IEC 60093 |
| Volume Resistivity | 1.0E+14 | ohms·cm | ASTM D257, IEC 60093 |
| Dielectric Strength | 18 | kV/mm | IEC 60243-1 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.800 mm) | HB | UL 94 |
| Additional Information |
|---|
| Specific Wear, Resin vs. Resin: 0.1 mm³/Kg*KmSpecific Wear, Resin vs. Metal: 0.03 mm³/Kg*Km |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 200 FR TFE 15 | RTP Company | Nylon 66 | RTP |
| Sinvicomp SFW7500 | Teknor Apex Asia Pacific PTE. LTD. | PVC, Flexible | Sinvicomp |
| CELBLEN PBG150 | Daicel Polymer Ltd. | PP, Unspecified | CELBLEN |
| GAPEX® RPP30DZ10BK | Ferro Corporation | PP Homopolymer | GAPEX® |
| LNP™ LUBRICOMP™ KG002 compound | SABIC Innovative Plastics | Acetal (POM) Copolymer | LNP™ LUBRICOMP™ |
