Order Products : sales@su-jiao.com

Nylene® 204 HS

Category:	Nylon 6 , Polyamide 6
Manufacturer:	Custom Resins Group
Trademark:	Nylene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	LB4Ko0_Nylene-204-HS.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Heat stabilized version general purpose, fast cycling molding resin

Crystallization initiators provide fast molding cycles through rapid melt set-up

In addition to protection from heat degradation, parts molded from NYLENE 204 HS have better dimensional stability at moisture equilibrium than parts molded from conventional nylon

Suitable for molding clip and fasteners, bushings, spacers, and other general purpose applications

General Information
Additive	Heat Stabilizer
Features	Fast Molding Cycle General Purpose Good Dimensional Stability Heat Stabilized
Uses	Bushings Fasteners General Purpose

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.13	g/cm³	ASTM D792
Molding Shrinkage - Flow	0.90	%	ASTM D955

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (23°C)	79.3	MPa	ASTM D638
Tensile Elongation (Break, 23°C)	60	%	ASTM D638
Flexural Modulus (23°C)	2760	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	48	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
0.45 MPa, Unannealed	175	°C
1.8 MPa, Unannealed	65.6	°C
Peak Melting Temperature	216	°C	ASTM D3418

Resin Grade	Manufacturer	Category	Trademark
TAROMID B 280 Z4	Taro Plast S.p.A.	Nylon 6	TAROMID B
Braskem PE SBC818R50	Braskem America Inc.	LDPE	Braskem PE
Evoprene™ GC 678	AlphaGary	SEBS	Evoprene™ GC
FERREX® GPP40CC	Ferro Corporation	PP, Unspecified	FERREX®
Leona™ WG143	Asahi Kasei Chemicals Corporation	Nylon 66	Leona™