Order Products : sales@su-jiao.com
RAMLLOY PZF101
| Category: | PC+ABS , Polycarbonate + ABS |
| Manufacturer: | Polyram Ram-On Industries |
| Trademark: | RAMLLOY |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LApwNZ_RAMLLOY-PZF101.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PC/PBT ALLOY FOR INJECTION MOULDING APPLICATIONS, LOW TEMPERATURE AND CHEMICAL RESISTANCE. |
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Mass-Flow Rate (MFR) (250°C/5.0 kg) | 18 | g/10 min | ASTM D1238, ISO 1133 |
| Molding Shrinkage | |||
| Flow | 3.0E-3 | % | ASTM D955 |
| -- | 3.0E-3 | % | ISO 2577 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1800 | MPa | ASTM D638, ISO 527-2 |
| Tensile Strength (Yield) | 50.0 | MPa | ASTM D638, ISO 527-2 |
| Tensile Elongation (Break) | 140 | % | ASTM D638, ISO 527-2 |
| Flexural Modulus | 1700 | MPa | ASTM D790, ISO 178 |
| Flexural Strength | 75.0 | MPa | ASTM D790, ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| -30°C | 550 | J/m | ASTM D256 |
| 23°C | 750 | J/m | ASTM D256 |
| -30°C | 55 | kJ/m² | ISO 180 |
| 23°C | 65 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, not annealed | 115 | °C | ASTM D648, ISO 75-2/B |
| 1.8 MPa, not annealed | 90.0 | °C | ASTM D648, ISO 75-2/A |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flammability | 10 | mm/min | FMVSS 302 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 | °C | |
| Drying Time | 4.0 - 5.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Rear Temperature | 230 - 240 | °C | |
| Middle Temperature | 240 - 250 | °C | |
| Front Temperature | 250 - 265 | °C | |
| Mold Temperature | 50.0 - 90.0 | °C | |
| Injection Pressure | 70.0 - 100 | MPa | |
| Holding Pressure | 35.0 - 70.0 | MPa | |
| Back Pressure | 0.350 - 0.700 | MPa |
| Injection instructions |
|---|
| Fill Speed: 25 to 50 mm/secMax Circumfrential Speed: 0.3 m/s |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Thermoset Plastics SC-148 | Thermoset, Lord Chemical Products | Silicone | Thermoset Plastics |
| TRIBOCOMP® PP-C LGF30 TS12 | EPIC Polymers | PP, Unspecified | TRIBOCOMP® |
| Grilon® BG-15 HM | EMS-GRIVORY | Nylon 6 | Grilon® |
| HiFill® PA4/6 GF30 FR HS L | Techmer Engineered Solutions | Nylon 46 | HiFill® |
| Hypro® PPH-T10 | Entec Polymers | PP Homopolymer | Hypro® |
