Order Products : sales@su-jiao.com

INFUSE™ 9000

Category:	OBC , Olefin Block Copolymer
Manufacturer:	The Dow Chemical Company
Trademark:	INFUSE™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	L7XIIz_INFUSE-9000.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

INFUSE™ 9000 Olefin Block Copolymer is a high performance olefin block copolymer that can be widely used in thermoplastic elastomer applications where higher service temperature requirements are needed.
INFUSE 9000 also provides high filler loading capability along with low compression set and good processability.

Main Characteristics:

High upper service temperature performance

Highly flexible with good elastic recovery

Fast set up times for processability

General purpose elastomer

Excellent for compounds and blends

Complies with

EU, No 10/2011

U.S. FDA FCN 424

Consult the regulations for complete details.

General Information
Agency Ratings	EU No 10/2011 FDA FCN 424
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.877	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	0.50	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, Compression Molded)	71		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus - 100% Secant (Compression Molded)	3.29	MPa	ASTM D638
Tensile Strength (Break, Compression Molded)	6.28	MPa	ASTM D638
Tensile Elongation (Break, Compression Molded)	370	%	ASTM D638

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength (Break)	15.0	MPa	ASTM D412
Tensile Elongation (Break)	1200	%	ASTM D412
Tear Strength	42.0	kN/m	ASTM D624
Compression Set			ASTM D395
23°C	23	%
70°C	45	%

Thermal	Nominal Value	Unit	Test Method
Melting Temperature (DSC)	120	°C	Internal Method
TMA ¹(1.00 mm)	104	°C	Internal Method

Note Message
1 .	1N, 5°C/min

Resin Grade	Manufacturer	Category	Trademark
Terprene™ 3130X	Mitsui Chemicals, Inc.	EPDM	Terprene™
TYNEC® V1200	Tyne Plastics LLC.	PC	TYNEC®
Ultramid® A3WG5 BK00564	BASF Corporation	Nylon 66	Ultramid®
Fainplast PVC PMP 75/OP	Fainplast Compounds S.r.l	PVC+PUR	Fainplast PVC
Magnobond 55-2	Magnolia Plastics, Inc.	Epoxy	Magnobond