Order Products : sales@su-jiao.com
BCC Resins BC 8760
| Category: | TSU , Polyurethane Thermoset Elastomer |
| Manufacturer: | BCC Products Inc. |
| Trademark: | BCC Resins |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | L2swF8_BCC-Resins-BC-8760.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| BC 8760 is a two-component urethane casting compound that is specifically formulated for high abrasion and impact resistance. It is recommended for use for the production casting of highly wear-resistant parts and linings. This product is safe, easy-to-handle, room temperature mixing and curing system that does not contain TDI, MDI, MDA, or MOCA. BC 8760 is relatively insensitive to typical environmental moisture and will make good void-free parts without the problems that some conventional urethane systems exhibit. The low viscosity and simple mix ratio assure uniform and easy mixing. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.20 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 60 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 67.6 | MPa | ASTM D638 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 33 | ||
| Resin | Mix Ratio by Weight: 100 | ||
| Pot Life (24°C) | 15 | min | |
| Demold Time (25°C) | 120 to 180 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® C4960 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Prime Polypro™ J106MG | Prime Polymer Co., Ltd. | PP Homopolymer | Prime Polypro™ |
| Nipol® AR 22 | Zeon Corporation | Rubber | Nipol® AR |
| Anjacom® 050/7020 | Almaak International GmbH | PC+ABS | Anjacom® |
| INLUBE PA6SI2 | Infinity LTL Engineered Compounds | Nylon 6 | INLUBE |
