Order Products : sales@su-jiao.com
Sinvicomp SIZ4508A
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | Teknor Apex Asia Pacific PTE. LTD. |
| Trademark: | Sinvicomp |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | L2GBx2_Sinvicomp-SIZ4508A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Sinvicomp SIZ4508A is a Flexible Polyvinyl Chloride material. It is available in Asia Pacific for extrusion. Primary attribute of Sinvicomp SIZ4508A: RoHS Compliant. Typical application of Sinvicomp SIZ4508A: Wire & Cable |
| General Information | |
|---|---|
| Uses |
|
| Wire Types (AS 3147/3191) |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.44 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 91 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 17.0 | MPa | IEC 60811-1-1 |
| Tensile Elongation (Break) | 260 | % | IEC 60811-1-1 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength (115°C, 504 hr) | 10 | % | AS 3147/3191 |
| Change in Ultimate Elongation (115°C, 504 hr) | 15 | % | AS 3147/3191 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (20°C) | 5.0E+13 | ohms·cm | BS 2782 |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Loss of Mass - 5 days (115°C) | 1.0 mg/cm2 | AS 3147/3191 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Axiall PVC 8950 | Axiall Corporation | PVC, Flexible | Axiall PVC |
| FM® 680-1 | Cytec Industries Inc. | PI, TS | FM® |
| Enviramid® N2325HL BK | Ravago Manufacturing Americas, LLC | Nylon 6 | Enviramid® |
| TOTAL Polyethylene Bio TPSeal® 0750_03 | TOTAL Refining & Chemicals | mPE | TOTAL Polyethylene |
| ALTECH® PA6 A 2030/320.01 GF30 UV | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
